Totally Integrated Automation - Automation Technology - Siemens

Routers
© Siemens AG 2011
Routers: Bridge to PROFIBUS –
IE/PB Link PN IO
Industrial communication
Vertical integration of PROFIBUS-based devices into Industrial
Ethernet and PROFINET
Routers: Bridge to WirelessHART –
IE/WSN-PA LINK
• Transfer the data from the PROFIBUS field
devices to Industrial Ethernet/PROFINET
• Integrate the PROFIBUS devices into a
PROFINET-based automation solution
• Configure the PROFIBUS devices on an
Ethernet-based engineering workstation
Vertical integration of WirelessHART field devices in Industrial
Ethernet
• Connection of up to 100 WirelessHART
devices
• Approved for operation in hazardous areas
in Zone 2
• Open TCP/IP communication and Modbus
TCP via the Ethernet interface
• Can be used with HART OPC servers from
the HART Communication Foundation
Routers: Bridge to PROFIBUS PA –
DP/PA coupler and link
Integration of the process instrumentation into the plant-wide
architecture
• Electrical interface for the implementation
of PROFIBUS DP on PROFIBUS PA for the
connection of the process instrumentation
• Connection to 2- and 4-wire devices in
normal or intrinsically safe environments
• In the case of critical applications, it can be
installed as a redundant interface capable
of hot swapping
• "Configuration in Run" supports the addition
and removal of devices during operation
Siemens TIA Product Guide 2011
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
131