Totally Integrated Automation - Automation Technology - Siemens

More documents

Recommendations

Info

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Power supplies For extreme ambient conditions – SIPLUS extreme Refined standard modules based on SITOP for extreme ambient conditions • Temperature range from -40°C/-25°C...+60°C/+70°C • 100% humidity, dewing, condensation, and ice formation permissible • Modules with a special conformal coating for use in atmospheres containing corrosive gases according to EN 60721-3-3 3C4 incl. salt fog and ISA S71.04 severity level G1; G2; G3; GX*) and EN 60721-3-3 3S4 incl. electrically conductive sand, dust and EN60721-3-3 3B2 mold, fungus and fungal spores (excepting fauna) • Increased mechanical strength Products: • SIPLUS LOGO! PS • SIPLUS S7-200 PS • SIPLUS S7-1200 PM1207 • SIPLUS S7-300 PS • SIPLUS S7-400 PS • SIPLUS PS smart • SIPLUS PS modular • SIPLUS POWER • SIPLUS PS signaling module • SIPLUS PS redundancy module • SIPLUS PS DC-UPS *) ISA S71.04 severity level GX: - Long-term load: SO2 < 4.8 ppm; H2S < 9.9 ppm; Cl < 0.2 ppm; HCl < 0.66 ppm; HF < 0.12 ppm; NH < 49 ppm; O3 < 0.1 ppm; NOX < 5.2 ppm - Limit value (max. 30 min/d): SO2 < 14.8 ppm; H2S < 49.7 ppm; Cl < 1.0 ppm; HCl < 3.3 ppm; HF < 2.4 ppm; NH < 247 ppm; O3 < 1.0 ppm; NOX < 10.4 ppm 178 Siemens TIA Product Guide 2011 © Siemens AG 2011
© Siemens AG 2011 Drive technology Motor management and control devices . . . 180 Motor and soft starters . . . 181 Converters . . . 187 Motors . . . 198 Geared motors . . . 203 Tools . . . 205 Gearboxes . . . 207 Couplings . . . 211 Condition Monitoring System . . . 212 Selection table for soft starters and motor starters . . . 214 Selection table for converters . . . 216 Selection table for motors . . . 218
Page 1 and 2:
Product Guide Edition 2011 © Sieme
Page 3 and 4:
Engineering Introduction Maximum en
Page 5 and 6:
Security Introduction Security: Dat
Page 7 and 8:
© Siemens AG 2011 Introduction Eva
Page 9 and 10:
Table of contents Safety Integrated
Page 11 and 12:
© Siemens AG 2011 Automation syste
Page 13 and 14:
Modular controller - SIMATIC S7-300
Page 15 and 16:
© Siemens AG 2011 SIMATIC PC-based
Page 17 and 18:
Fail-safe controller - SIMATIC S7
Page 19 and 20:
Technological tasks - Integrated fu
Page 21 and 22:
© Siemens AG 2011 Automation syste
Page 23 and 24:
2048/2048 bytes 16384/ 16384 bytes
Page 25 and 26:
Modular I/O system (IP20) - SIMATIC
Page 27 and 28:
© Siemens AG 2011 Modular I/O syst
Page 29 and 30:
© Siemens AG 2011 For extreme ambi
Page 32 and 33:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 34 and 35:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 36 and 37:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 38 and 39:
2 Motion Control SIMATIC SIMOTION P
Page 40 and 41:
Motion Control 40 Siemens TIA Produ
Page 42 and 43:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 44 and 45:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 46 and 47:
3 Computerized Numerical Control SI
Page 48 and 49:
Computerized Numerical Control 48 S
Page 50 and 51:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 52 and 53:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 54 and 55:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 56 and 57:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 58 and 59:
1 2 3 4 5 6 11 12 13 14 15 16 Proce
Page 60 and 61:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 62 and 63:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 64 and 65:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 66 and 67:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 68 and 69:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 70 and 71:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 72 and 73:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 74 and 75:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 76 and 77:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 78 and 79:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 80 and 81:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 82 and 83:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 84 and 85:
1 2 3 4 5 6 7 8 9 10 15 16 Automati
Page 86 and 87:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 88 and 89:
5 Automation software S7-SCL S7-GRA
Page 90 and 91:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 92 and 93:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 94 and 95:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 96 and 97:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 98 and 99:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 100 and 101:
1 2 3 4 5 6 7 15 16 Safety Integrat
Page 102 and 103:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 104 and 105:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 106 and 107:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 108 and 109:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 110 and 111:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 112:
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
Page 115 and 116:
Industrial communication • Connec
Page 117 and 118:
© Siemens AG 2011 SCALANCE X Indus
Page 119 and 120:
SCALANCE X-200IRT - Operating in ha
Page 121 and 122:
Industrial Wireless LAN - SCALANCE
Page 123 and 124:
PROFIBUS © Siemens AG 2011 Industr
Page 125 and 126:
PC-based products for industrial ap
Page 127 and 128: © Siemens AG 2011 Industrial commu
Page 129 and 130: IO-Link © Siemens AG 2011 Seamless
Page 131 and 132: Routers © Siemens AG 2011 Routers:
Page 133 and 134: © Siemens AG 2011 Routers: Bridge
Page 135 and 136: Telecontrol © Siemens AG 2011 Indu
Page 137 and 138: © Siemens AG 2011 Human Machine In
Page 139 and 140: © Siemens AG 2011 Human Machine In
Page 141 and 142: HMI Multi Panels - SIMATIC Multi Pa
Page 143 and 144: SIMATIC STEP 7 Basic - shared engin
Page 145 and 146: Tags ■ ■ ■ Graphics Objects
Page 147 and 148: Alarm buffer ■ ■ ■ ■ ■ Pr
Page 149 and 150: © Siemens AG 2011 Industrial PC Em
Page 151 and 152: Embedded industrial PC - SIMATIC IP
Page 153 and 154: © Siemens AG 2011 Can be mounted i
Page 155 and 156: © Siemens AG 2011 HMI devices with
Page 157 and 158: Slot codes: L = long (265 mm) K = s
Page 159 and 160: © Siemens AG 2011 Sensor systems P
Page 161 and 162: Level transmitters - SITRANS L The
Page 163 and 164: For extreme ambient conditions - SI
Page 165 and 166: Vision sensors Vision sensors © Si
Page 167 and 168: © Siemens AG 2011 Industrial ident
Page 169 and 170: RFID systems - SIMATIC RF © Siemen
Page 171 and 172: Identification systems Code reading
Page 173 and 174: © Siemens AG 2011 Power supplies S
Page 175 and 176: The powerful standard power supply
Page 177: © Siemens AG 2011 Power supplies I
Page 181 and 182: Motor and soft starters © Siemens
Page 183 and 184: © Siemens AG 2011 For applications
Page 185 and 186: © Siemens AG 2011 For applications
Page 187 and 188: Converters Low-voltage converters -
Page 189 and 190: Low-voltage converters - SINAMICS G
Page 191 and 192: Low-voltage converters - SINAMICS S
Page 193 and 194: Low-voltage converters - DYNAVERT T
Page 195 and 196: © Siemens AG 2011 Low-voltage conv
Page 197 and 198: DC converters - SIMOREG DC Master T
Page 199 and 200: Unbeatable reliability, ruggedness,
Page 201 and 202: DC motors © Siemens AG 2011 Outsta
Page 203 and 204: Geared motors The right geared moto
Page 205 and 206: Tools © Siemens AG 2011 Drive tech
Page 207 and 208: Gearboxes Always the right solution
Page 209 and 210: CAVEX worm gearbox © Siemens AG 20
Page 211 and 212: Couplings Drive technology As the w
Page 213 and 214: © Siemens AG 2011 Condition Monito
Page 215 and 216: Motor starters SIMATIC ET 200pro mo
Page 217 and 218: Low-voltage converters DC drives Me
Page 219 and 220: Options Brake ■ ■ ■ ■ On re
Page 221 and 222: Options Brake ■ ■ ■ ■ ■ D
Page 223 and 224: © Siemens AG 2011 Low-voltage powe
Page 225 and 226: © Siemens AG 2011 Low-voltage powe
Page 227 and 228: Low-voltage power distribution Enha
Page 229 and 230:
© Siemens AG 2011 Services Service
Page 231 and 232:
Training Professional training for
Page 233 and 234:
Related documentation Practice-orie
Page 235 and 236:
© Siemens AG 2011 Siemens TIA Prod
show all

Totally Integrated Automation - Automation Technology - Siemens

Create successful ePaper yourself

Delete template?

Save as template?