Totally Integrated Automation - Automation Technology - Siemens

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Automation software
PLC-based Motion Control –
Easy Motion Control with SIMATIC
Positioning and synchronous operation made easy – with your PLC
86 Siemens TIA Product Guide 2011
• Flexible, software-based solution for
positioning and gearing with the
SIMATIC S7-300, S7-400, and WinAC
• Logic and motion control are programmed
using SIMATIC STEP 7
• Function block library for absolute
and relative motion, reference point
approach, jogging, override,
and simulation
• Standard I/O modules for connecting sensor signals and controlling
the reference output
• Fulfills the requirements of the PLCopen motion control specification
Extended control options –
Loadable function blocks
© Siemens AG 2011
Function bocks for expansion of the control functions
• For positioning or control applications that
have been implemented with SIMATIC
controllers and corresponding software
• Software solutions for flexible use on almost
all SIMATIC controllers
• Performance and dynamic response can
be scaled by selecting the target system
Creating the project documentation –
SIMATIC S7 DOCPRO
Creating and managing plant documentation
• Permits structuring of project data, preparation in the form of wiring
manuals, and the printout in a specified print format
• Central generation, processing, and management of title block data
• The supplied standard layout templates are used as the basis for your
own layouts and cover sheets