Models and Parameters - Digitech
Models and Parameters - Digitech
Models and Parameters - Digitech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Stereo Operation<br />
For stereo operation connect the guitar to the Input of the RP250. Connect one cable to the<br />
RP250’s Left (Mono) output, <strong>and</strong> another cable to the RP250’s Right output. Connect one cable<br />
to the input of one amplifier, channel of a mixer, or power amp. Connect the second cable to a<br />
second amplifier, second channel of a mixer, or power amp. If connecting to a mixing console, set<br />
the pan controls of the mixer channels hard left <strong>and</strong> right in order to retain stereo separation. If<br />
connecting to a mixer, set the Amp/Mixer switch to Mixer. If connecting to two amplifiers, set<br />
the Amp/Mixer switch to Amp.<br />
Stereo Amp Setup<br />
Amp/Mixer<br />
switch set to<br />
Amp.<br />
Guitar Amp Input/Effect Returns<br />
Outputs Input<br />
NOTE: When using a guitar amp,<br />
it may be best to connect the guitar<br />
to the Input of the RP250 <strong>and</strong><br />
the Output of the RP250 to the<br />
effect return of the amplifier.<br />
13