Models and Parameters - Digitech

32
Range - Knob 4 adjusts the throaty quality of the YaYa effect. Ranges from 0 to 49.
Step Filter (stpflt)
The Step Filter is like an automatic “random wah” with a square waveform.
Speed - Knob 2 adjusts the speed of the Wah effect. Ranges from 0 to 99.
Intensity - Knob 3 controls the intensity of the Wah effect. Ranges from 0 to 99.
DigiTech Whammy (wHammy)
The DigiTech Whammy TM is an effect that uses an Expression Pedal to bend the pitch of the incoming
signal, or add a bendable harmony with the original signal. As the Pedal is moved, the note
bends either up or down. When DigiTech Whammy is selected, it is automatically placed before
the Amp modeling as shown in the block diagram on page 19.
Shift Amount - Knob 2 selects the interval and direction of the pitch bend. Choices are
as follows:
Whammy TM (no Dry Signal)
oct up (1 octave above)
2octup (2 octaves above)
2nd dn (a second below)
rv2ndn (a second below reversed pedal action)
4th dn (a fourth below)
oct dn (an octave below)
2octdn (2 octaves below)
DIVeBM (Dive Bomb)
Harmony Bends (Dry Signal Added)
m3>Mj3 (a minor third to a Major third)
2ndmj3 (a second above to a Major third above)
3rd4th (a third above to a fourth above)
4th5th (a fourth above to a fifth above)
5thoct (a fifth above to an octave above)
hoctup (one octave above)
hoctdn (one octave down)
octu>d (octave up/down)