Models and Parameters - Digitech

More documents

Recommendations

Info

20 Model Definitions Each Amp and Effect model within the RP250 can be programmed to suit your personal taste and application. Understanding how these components alter the sound, and how each parameter alters the effect, will help you achieve the sound you are looking for. The following overview of the RP250’s effects outlines what each effect and parameter does. Pickup The Pickup Simulator provides the thick tone of a humbucker pickup to a guitar with single coil pickups, or the bright, edgy sound of a single coil pickup to a guitar with a humbucker. This gives you the best of both worlds without having to change guitars during a performance. Pickup Model - Knob 1 selects the Pickup model to be simulated. Values include: SC>Hb (gives a single coil pickup the warm tone of a humbucker), and Hb>SC (gives a humbucker the unique sound of a single coil). Press this knob to turn Pickup modeling on and off. Preset Level - Knob 4 adjusts the preset’s level. Wah Wah is an effect controlled by an Expression Pedal making the guitar sound as if it’s saying “Wah.” Wah Model - Knob 1 selects the Wah model. Values include: FuLrnG (DigiTech ® Full Range Wah sweeps the entire spectrum of audible frequencies), CrYwah (Cry Wah is a traditional sounding Wah), and clyde(based on a Vox ® Clyde McCoyTM Wah). Press this knob to turn Wah models on and off. Wah Minimum - Knob 2 adjusts the Wah Pedal Minimum. Ranges from 0 (toe up) to 99 (toe down). Wah Maximum - Knob 3 adjusts the Wah Pedal Maximum. Ranges from 0 (toe up) to 99 (toe down).
Wah Level - Knob 4 adjusts the Wah Level. Ranges from 0dB to +12dB. Compressor A Compressor is used to increase sustain, tighten up guitars, and prevent the signal from clipping the input of other effects. It sets a maximum boundary for the strength of a signal. Comp Model - Knob 1 selects one of two Compressor models: DIGCMP (DigiTech ® Compressor) or CSCOMP (Based on a Boss ® CS-2 Compressor/Sustainer). Press this knob to turn the Compressor on and off. Sustain - Knob 2 adjusts the amount of sustain. Ranges from 0 to 99. Tone/Attack - Knob 3 adjusts the tone for the DigiTech Compressor, or attack for the Boss CS-2. Ranges from 0 to 99. Compressor Level - Knob 4 adjusts the Level from the Compressor. Ranges from 0 to 99. Attack (X-EditTM only for DigiComp) - Adjusts the amount of time the Compressor takes to respond to a signal that exceeds the threshold. Ranges from 0 to 99. Distortion The RP250 models the tones of 13 popular distortion stompboxes, each of which can be tweaked and modified, just like the real thing. Distortion Model - Knob 1 selects one of 13 Distortion models. Press this knob to turn the Distortion on and off. 21
Page 1: Modeling Guitar Processor User’s
Page 4 and 5: Table of Contents Section One - Int
Page 6 and 7: Warranty We at DigiTech ® are very
Page 8 and 9: 2 About the RP250 Performance Mode
Page 10 and 11: 4 Tone Library (Knob 1) In Performa
Page 12 and 13: 6 A Guided Tour of the RP250 Front
Page 14 and 15: 8 Effects Level (Knob 3) 1. In Perf
Page 16 and 17: 10 Rear Panel 1. Input Connect your
Page 18 and 19: 12 Getting Started Making Connectio
Page 20 and 21: 14 Mixer 1 2 3 4 5 6 Stereo Mixer S
Page 22 and 23: 16 Section Two - Editing Functions
Page 24 and 25: 4. Select the User preset location
Page 28 and 29: 22 scream - Based on an Ibanez ® T
Page 30 and 31: 24 57chmp - Based on a ‘57 Fender
Page 32 and 33: EQ The RP250’s EQ helps further s
Page 34 and 35: 28 from 0 to 99. Waveform (X-Edit T
Page 36 and 37: VibroPan (vibpan) A vibrato is an e
Page 38 and 39: 32 Range - Knob 4 adjusts the throa
Page 40 and 41: 34 Intelligent Pitch Shifting (IPS)
Page 42 and 43: 36 Duck Thresh (X-Edit TM only) - A
Page 44 and 45: 38 Section Four - Other Functions D
Page 46 and 47: 40 Factory Reset This function rese
Page 48 and 49: 42 Section 5 - Appendix Specificati
Page 50: 44 Expression Pedal - Assignable Pa
Page 53 and 54: Effects Library 47
Page 56: DigiTech® 8760 South Sandy Parkway

Models and Parameters - Digitech

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?