Models and Parameters - Digitech
Models and Parameters - Digitech
Models and Parameters - Digitech
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pedal Position - Knob 3 provides a manual control of the Whammy pedal position.<br />
Ranges from 0 to 99.<br />
Mix - Knob 4 adjusts the Whammy mix. Ranges from 0 to 99.<br />
Pitch Shift (PitCH)<br />
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copy to a different note. The<br />
shifted note is then mixed back with the original signal, sounding as if two guitars were playing<br />
different notes.<br />
Shift Amount - Knob 2 selects the interval of the shifted pitch. Ranges from -24 (2<br />
octaves below) to 24 (2 octaves above).<br />
Mix - Knob 4 controls the mix level of the shifted pitch. Ranges from 0 to 99.<br />
Detune (Detune)<br />
A Detuner makes a copy of your incoming signal, takes the copied signal slightly out of tune from<br />
the original, then mixes the two signals together. The result is a doubling type of effect as if two<br />
guitars were playing the same part together.<br />
Shift Amount - Knob 2 adjusts the amount of pitch difference applied to the copied signal.<br />
Ranges from -24 to 24 cents.<br />
Level - Knob 4 controls the mix of the detuned note. Ranges from 0 to 99.<br />
33