iSTAR Pro 4U Rack Mount Quick Start Installation Guide
iSTAR Pro 4U Rack Mount Quick Start Installation Guide
iSTAR Pro 4U Rack Mount Quick Start Installation Guide
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Components/Connections<br />
Dry Contact<br />
RM Readers with dry power<br />
The dry contact method requires an external power supply<br />
1. Verify the JPn jumper to be in the either the X position<br />
2. Move the wire from the COM pin to the C pin<br />
3. Connect one side of the lock to pin 9. (Observe polarity)<br />
4. Connect one side of the power source to pin 10. (Observe polarity)<br />
5. Connect the other side of the power source to the other side of the lock. (Observe<br />
polarity)<br />
FIGURE 21. Dry Contact<br />
28