Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Marin</strong>-5 Operator’s <strong>Manual</strong><br />
Installing the <strong>Marin</strong>-5<br />
Installing the <strong>Marin</strong>-5 Spray Chamber/Glassware<br />
Assembly<br />
The <strong>Marin</strong>-5 spray chamber/glassware is packed in a separate box when<br />
shipped. To install the spray chamber/glassware assembly in the<br />
<strong>Marin</strong>-5, complete the following steps:<br />
1 Loosen the two rear thumbscrews on the <strong>Marin</strong>-5 cabinet and<br />
carefully slide the cover up, forward and past the cooling fan.<br />
Then lift the cover completely off.<br />
2 Carefully open the box containing the spray chamber /<br />
glassware assembly and remove the contents. Note that the<br />
mounting stand is already attached to assembly.<br />
3 Carefully remove the protective packing around the spray<br />
chamber / glassware assembly.<br />
3–4