Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Marin</strong>-5 Operator’s <strong>Manual</strong><br />
Maintaining the <strong>Marin</strong>-5<br />
4. Repeat step 3, using a towel dampened with clear water.<br />
This process removes any remaining contaminants.<br />
5. Dry the lid of the <strong>Marin</strong>-5 with a dry towel. The <strong>Marin</strong>-5<br />
must be thoroughly dry before you turn the power on.<br />
Daily Internal Cleaning<br />
Use of the <strong>Marin</strong>-5 can result in spills inside the cover of the unit. To<br />
clean any internal spills, complete the following:<br />
1. Shut down and disconnect the power cord to the <strong>Marin</strong>-5.<br />
2. Allow the <strong>Marin</strong>-5 to cool for 30 minutes.<br />
3. Loosen the two rear thumbscrews and carefully slide the<br />
cover forward past the cooling fan.<br />
4. Open the front door, carefully place the nebulizer uptake<br />
line inside the <strong>Marin</strong>-5 and then completely remove the<br />
cover.<br />
5. Wipe the area around the glassware and the inner surface of<br />
the cover using a towel dampened with a laboratory-grade<br />
cleaning agent.<br />
6. Repeat step 5, using a towel dampened with clear water.<br />
This process removes any remaining contaminants.<br />
7. Dry the area around the glassware and the inner surface of<br />
the cover with a dry towel. The <strong>Marin</strong>-5 must be thoroughly<br />
dry before you turn the power on.<br />
8. Replace the cover and close and secure the <strong>Marin</strong>-5 front<br />
door.<br />
6-3
Change language