Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
Marin-5 Operator's Manual - CETAC Technologies
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Marin</strong>-5 Operator’s <strong>Manual</strong><br />
Installing the <strong>Marin</strong>-5<br />
8 Carefully place the two Teflon PFA drain lines through the<br />
rear panel hole and attach the lines to the peristaltic drain<br />
pump on the back of the <strong>Marin</strong>-5. See Figure 3- 7. Note that<br />
the drain lines may be connected to either open pump channel.<br />
Figure 3- 7. Connection of PFA Drain Lines to Drain Pump.<br />
9 Carefully replace the cover onto the <strong>Marin</strong>-5 cabinet.<br />
Connecting the <strong>Marin</strong>-5 to the ICP-AES or ICP-MS<br />
Depending on the ICP-AES or ICP-MS manufacturer and model, a torch<br />
adapter is supplied for interfacing. Adapters are available for all ICP-<br />
AES or ICP-MS instruments.<br />
10 A length of 5/16” O.D. x 3/16” I.D. Tygon® PVC tubing is<br />
provided with the appropriate ICP-AES or ICP-MS torch<br />
3–8
Change language