E - MotorSport Vision Racing
E - MotorSport Vision Racing
E - MotorSport Vision Racing
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2011 MCRCB Yearbook<br />
3.51 PARC FERME<br />
3.51.1 1) Machines must go direct to the parc ferme immediately after each<br />
qualifying practice and race.<br />
2) One helper is allowed to assist the rider to place the machine on a<br />
paddock stand, after which all personnel must leave parc ferme. The<br />
machine must not otherwise be touched or interfered with.<br />
3) Machines will be held in the parc ferme as follows:<br />
Qualifying Practice<br />
1st session<br />
All machines must go direct to the<br />
designated parc ferme, the technical officials<br />
may select machines for examination or may<br />
release machines as soon as possible.<br />
2nd, final or only session<br />
or Superbike Qualification<br />
Race<br />
All machines must go directly to the parc<br />
ferme for a minimum of 30 minutes.<br />
All machines must go to the parc ferme for<br />
30 minutes.<br />
Where the class has two races on the same<br />
day. After the first race all machines must go<br />
direct to the parc ferme or may go directly to<br />
the garage, if allocated. The technical<br />
officials may select machines for<br />
examination or release machines as soon as<br />
possible, however, NO WORK MAY BE<br />
CARRIED OUT ON MACHINES FOR 15<br />
MINUTES UNLESS AUTHORISED BY AN<br />
OFFICIAL, if instructed the machine must be<br />
taken immediately to Technical Control.<br />
A mechanic must be available outside of the parc ferme during this period.<br />
3.51.2 Any protest against a machine must be lodged when a machine is held in<br />
the parc ferme.<br />
3.51.3 Failure to comply will incur judicial penalties in accordance with B<br />
4.5.4.<br />
3.51.4 If a motorcycle is involved in an accident, the rider must present his<br />
machine for re-examination together with helmet and clothing. If the helmet<br />
is clearly defective it will be retained until after the meeting.<br />
The rider will not be allowed to continue in the event until he receives<br />
clearance from the Chief Technical Officer.<br />
3.51.5 Post Race/Practice Eligibility Checking<br />
Any machine may be checked after the Race or Practice to ensure it<br />
conforms to the eligibility regulations. The rider or his team is responsible for<br />
G<br />
108