Seko Twindose 35 Series Inst.. - UK
Seko Twindose 35 Series Inst.. - UK
Seko Twindose 35 Series Inst.. - UK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TWINDOSE <strong>35</strong> – System for dishwashers<br />
3 DESCRIPTION AND SETTINGS FOR THE POTENTIOMETER DIP-SWITCHES &<br />
JUMPERS<br />
3.1 DESCRIPTION OF THE DIP-SWITCHES<br />
CAL. OFF<br />
CAL. ON<br />
DIP<br />
Switch<br />
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
ON/OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
ON<br />
OFF<br />
OFF<br />
Setting<br />
System set for conveyor dishwasher (CONVEYOR)<br />
System set for single-tank dishwasher (DOOR)<br />
Operation with conductometric sensor<br />
Operation without conductometric sensor (timer mode)<br />
System with inductive probe<br />
System with conductive probe.<br />
Rinse aid pump in timer mode<br />
Rinse aid pump is speed mode<br />
Probe calibration ON<br />
Probe calibration OFF<br />
Sanitizer pump activated along with the rinse aid pump.<br />
Sanitizer pump activated along with the detergent pump.<br />
Rinse aid pump limitation activated - under all conditions the rinse aid pump will dose for a<br />
maximum of 15 seconds.<br />
Rinse aid pump limitation deactivated - the pump will dose for the entire time set in the washing<br />
program.<br />
Cut-out level alarm enabling - when a level signal is received, the system cuts out dosing by all the<br />
pumps.<br />
Cut-out level alarm disabling- when a level signal is received an alarm LED will simply switch on,<br />
but the pumps will not be stopped.<br />
To prime the detergent pump, press the “DETERGENT PRIME” key<br />
To prime the rinse aid pump, press the “RINSE-AID PRIME” key<br />
To prime the sanitizer pump, press the “SANITIZER PRIME” key<br />
ON<br />
TWINDOSE <strong>35</strong> code 0000136655 rev. 1.0 16