Seko Twindose 35 Series Inst.. - UK
Seko Twindose 35 Series Inst.. - UK
Seko Twindose 35 Series Inst.. - UK
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
TWINDOSE <strong>35</strong> – System for dishwashers<br />
<br />
RINSE SIGNAL<br />
DETERGENT PUMP<br />
The detergent pump is not controlled in this mode.<br />
RINSE AID PUMP<br />
When the signal from the solenoid valve, which controls the rinsing, is activated the rinse aid pump is activated in<br />
the time mode or in the speed mode, depending on how the DIP-switch 4 was set.<br />
• If it is set in the RINSE SPEED mode, the rinse aid pump will dose at the set speed using the potentiometer<br />
POT1 for the whole duration of the rinsing signal.<br />
• If it is set in the RINSE TIME mode, the rinse aid pump will dose at the maximum speed for the time set using<br />
the potentiometer POT1.<br />
In both cases, if the RINSE LIM ON mode is set using the DIP-switch 7, the rinse aid pump will stop dosing after 15<br />
seconds independently from the set time or from the duration of the RINSE SIGNAL. In order to de-activate this<br />
function, move the DIP-switch 7 to the left (RINSE LIM OFF)<br />
CAL. OFF<br />
CAL. ON<br />
.<br />
WARNING<br />
If the RINSE LIM ON mode is activated and the rinse aid pump is set in time for a duration of less than 15 seconds,<br />
the pump will dose for the set time using the POT1.<br />
SANITIZER PUMP (ONLY 3-PUMP VERSIONS)<br />
The sanitizer pump (optional) is activated simultaneously with the rinse aid pump only if the DIP-switch 6 is set in<br />
the “ON” position (SANI W/RINSE)<br />
CAL. OFF<br />
CAL. ON<br />
If DIP-switch 6 is set in the “OFF” position (SANI W/DET), the sanitizer pump will not be activated.<br />
TWINDOSE <strong>35</strong> code 0000136655 rev. 1.0 26