condair FF2
condair FF2
condair FF2
SHOW LESS
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
24<br />
6. Mounting the step valve block: Fix the step valve block at the appropriate position to the duct<br />
using the self-tapping screws provided.<br />
Then, drill duct passages ø32.5 mm and close the holes inside and outside with the rubber<br />
sleeves provided.<br />
7. Connecting the high-pressure hoses to the step valve block: Connect the high-pressure<br />
hoses to the step valve block, then lead the hoses through the rubber sleeves into the duct as<br />
shown in the illustration below.
Change language