condair FF2

More documents

Recommendations

Info

26 5.3 Mounting the pump station 5.3.1 Notes on positioning and mounting the pump station Please observe the following notes on positioning and mounting: – Place the pump station in a way that: – the distance to the humidifier unit is as short as possible. Note: High-pressure hoses of 2 m, 5 m or 10 m length are available from stock. – it is freely accessible and there is enough space for convenient operation and maintenance (min. free space around pump station: laterally 0.5 m, in front 0.6 m). – The pump station is designed for the operation in protected rooms and must therefore not be installed outside. – Do not install the pump station in exposed locations or locations with heavy dust load. – The pump station must be installed only in a location having a water drain on the floor. If this is not possible, it is mandatory to provide water sensors to safely interrupt water supply in case of leakage. Furthermore, choose a suitable location that prevents damage to material assets in case of leakage. – The pump station is designed for installation on a load-carrying floor or on the optional floor stand. The pump station or the floor stand must be fixed with screws to the floor (protection against shifting and tilting). Caution! Do not install the pump station to vibrating components.
27 5.3.2 Dimension and weights of pump station all dimensions in mm 904 25 83 404 770 376 248 538 602 662 855 181,5 347,5 38 895 min. 500 min. 500 min. 800 Weight of pump station: Weight of floor stand: approx. 80 kg approx. 6 kg
Page 1: Condair FF2 Adiabatic High-Pressure
Page 4 and 5: 1 Introduction 1.1 To the very begi
Page 6 and 7: 2 For your safety General Every per
Page 8 and 9: 3 Overview of Condair FF2 3.1 Conda
Page 10 and 11: 10 3.2 Pump station Overview 15 14
Page 12 and 13: 12 3.3 Humidifier unit 1 2 3 4 5 6
Page 14 and 15: 14 3.4 Functional description 5 380
Page 16 and 17: 16 General Via the stop valve (8) t
Page 18 and 19: 18 4 Notes on planning Prior to des
Page 20 and 21: 20 5 Installation works 5.1 Importa
Page 22 and 23: 22 2. Mounting the pipe supports: F
Page 24 and 25: 24 6. Mounting the step valve block
Page 28 and 29: 28 5.3.3 Mounting the pump station
Page 30 and 31: 30 - Important! Before connecting,
Page 32 and 33: 32 5.5 Electrical installation 5.5.
Page 34 and 35: 34 5.5.3 Notes on electric installa
Page 36 and 37: 36 6 Initial commissioning It is ma
Page 38 and 39: 38 7 Operation 7.1 Display and oper
Page 40 and 41: 40 7.3 Inspections during operation
Page 42 and 43: 42 8.2 Maintenance intervals To ens
Page 44 and 45: 44 8.5 Removal of components 8.5.1
Page 46 and 47: 46 9 Troubleshooting 9.1 Important
Page 48 and 49: 48 Error Cause Remedy Excessive flu
Page 50 and 51: 50 10 Product data 10.1 Technical s
Page 52 and 53: 52 10 Appendix 10.1 Diagram h,x
Page 54 and 55: Notes
Page 56: Consulting, Sales and Service: Solu

condair FF2

Create successful ePaper yourself

Delete template?

Save as template?