USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

MOTOMAN ROBOTICS EUROPE
User’s manual Ladder Editor 32
Line No. Search Jump
Created: 96-01-31 Revised: 01-04-05 Doc. name: Mrs55130-ch22.fm
22. Line jump function
The line jump function searches for and jumps to the line with the keyword.
22.1 Line No. Search Jump
This function jumps to the specified line No.
How to operate
1) Select [Edit] – [Find Line No.], or select (black) from the search jump tool
bar (refer to "Search jump tool bar").
When the dialog box shown in fig. below appears, enter the line No. to jump
and click the [OK] button.
Page: 75
22.2 Parts set value search jump
This function searches for values such as relay Nos., register Nos., and constants
set to the ladder parts, and then jumps to the line with the set values.
How to operate
1) Select [Edit] – [Find setting value] – [Find], or select (brown) from the
search jump tool bar (refer to "Search Jump Tool Bar").
2) When the dialog shown in fig. below appears, enter the type of the value and
the set value to be searched and click the [OK] button.
■ Previous/Next Search Jump
Previous search and next search functions can be used for searching for parts set
values only.
How to operate
Fig.51 "Line Search" Dialog Box
Fig.52 "Set Value Searching" Dialog Box
1) For a previous search, select [Edit] – [Find setting value] – [Back find].
Or select (brown) from the search jump tool bar (refer to "Search Jump
Tool Bar").
2) For next search, select [Edit] – [Find setting value] – [Next Find].
Or select (brown) from the search jump tool bar.