USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

More documents

Recommendations

Info

Page: 84 MOTOMAN ROBOTICS EUROPE User’s manual Ladder Editor 32 Created: 96-01-31 Revised: 01-04-09 Doc. name: Mrs55130-ch24.fm Work file forced output function 24.6 Work file forced output function Ladder Editor 32 stores only the ladder programs in which compiling and grammatical checks, etc. are completed normally. However, the procedure may be interrupted temporarily during editing. To store a ladder program that cannot be compiled during editing, it can be forcely stored as a work file. How to operate 1) Select [Option] – [Save tempolary file]. 2) When the [Save File] dialog box appears, use an arbitrary file name to store it. Note! Even if the reading source is a CMOS file, a work file can only output a text file as a ladder program file. 24.7 Automatic updating function If an attempt to move to another line is made without selecting [Line Alt] or [Line Insert] when the data has been edited in the "ladder editing" display, one can select whether the [Verification] dialog box appears or the line is to be updated automatically. For automatic updating, select either [Auto alt update] or [Auto insert update]. How to operate 1) Displaying the [Verification] dialog box. Select [Option] – [Auto update mode] – [Confirm Line Alt] to place checkmark in the box. 2) Updating automatically Select [Option] – [Auto update mode] – [Confirm Line Alt] to remove the checkmark. When the checkmark is removed, select either [Option] – [Auto update mode] – [Auto alt update] or [Option] – [Auto update mode] – [Auto insert update] . 24.8 Switching short name display/non-display Relay names and register names have information for short names. A short name can appear along with the relay No. or register No. corresponding to it in the "ladder editing" display. How to operate 1) Select [View] – [Display short name] to place checkmark in the box. Fig.63 "Short Name" Display
MOTOMAN ROBOTICS EUROPE User’s manual Ladder Editor 32 Other Optional Settings 24.9 Other Optional Settings Select the Ladder Editor 32 optional functions. How to Operate Created: 96-01-31 Revised: 01-04-09 Doc. name: Mrs55130-ch24.fm 1) Select [Option] – [Option], and the [Option] dialog box appears. Fig.64 [Option] Dialog Box Page: 85 Name file auto save: Automatically stores a name file at the same time as a ladder file (or CMOS.HEX). Refer to “Automatic Storing Function of Name File”. Temporary file auto save: Automatically stores the existing data as a temporary file before editing when overwriting a line or inserting a line. Refer to “Automatic Work File Storing Function”. Automatic backup of reading file: Creates a backup of an original file when storing a ladder file or name file. Refer to “Automatic Backup Function of Read-in Files (Original Files)”. Enable default file open folder: Sets the default folder of the [Open] dialog box which appeared when [File] – [Open] were selected.
Page 1 and 2:
MOTOMAN XRC USER’S MANUAL Ladder
Page 3 and 4:
MOTOMAN ROBOTICS EUROPE User’s ma
Page 5 and 6:
Page 7 and 8:
Page 9 and 10:
Page 11 and 12:
Installation MOTOMAN ROBOTICS EUROP
Page 13 and 14:
Installation MOTOMAN ROBOTICS EUROP
Page 15 and 16:
Uninstall MOTOMAN ROBOTICS EUROPE S
Page 17 and 18:
Page 19 and 20:
Function MOTOMAN ROBOTICS EUROPE Us
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
How to end MOTOMAN ROBOTICS EUROPE
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40: MOTOMAN ROBOTICS EUROPE User’s ma
Page 89: MOTOMAN ROBOTICS EUROPE User’s ma
Page 109 and 110: Notes
show all

USER'S MANUAL Ladder Editor 32 version 1.2 - Motoman

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?