ParSec Data Display & Entry Panel (DDE ... - How do I

More documents

Recommendations

Info

4.4.3 System Options The following system options are provided • Set date & time • Set default SAT pulse count - the global sensitivity setting for all SAT's subsequently acquired except those programmed individually (see SAT options); the count may be set between 1 & 9 pulses, with 1 giving the maximum sensitivity; this setting should ideally be made before SAT's are acquired. Switch S9 on the ParSec reader maybe used in combination with the DDE pulse count. (See section 4.2.2 for more details) • Disabling and re-enabling alarms from all PAT's (tamper alarms are not disabled) • Disabling and re-enabling alarms from all SAT's (tamper alarms are not disabled) set time 6 enter date/time dd/mm/yy hh:mm 0201971140 Accept 2 8 default pulses 6 pulse count 1 5 Accept 2 8 or time out 4 system options 6 disable all pats Accept enable all pats 29-Mar-00 10:31 Monitoring 3333 Accept 2 8 status v2.2 p-y s-y a-y t=006 2 8 disable all sats Accept enable all sats System Options Note 1. When all PAT or SAT alarms have been disabled, no alarm will be generated from the DDE when PAT or SAT transmissions are detected by a Reader; to ensure system integrity the PAT or SAT alarms should be re-enabled as soon as possible. DDE Installation & Operation Manual - Issue: 5 August 2000 - Page 28
4.4.4 Reset Options This function clears the DDE tag memory of all logged PAT's and SAT's Use with caution! or time out 4 Reset options 6 Clear Tag Table Accept/ Reject 29-Mar-00 10:31 Monitoring 3333 Accept 2 8 Status v3.x P-Y S-Y A-Y T=006 2 8 Clear Event Log Reset Options Note- Clearing the Event Log clears all the events stored in the Print Log (Up to 50 events). DDE Installation & Operation Manual - Issue: 5 August 2000 - Page 29
Page 1 and 2: ParSec Data Display & Entry Panel (
Page 3 and 4: ParSec Data Display & Entry Panel (
Page 5 and 6: CONTENTS 1 Caution - Static Precaut
Page 7 and 8: 1 CAUTION- STATIC PRECAUTIONS Some
Page 9 and 10: Design The DDE consists of a hinged
Page 11 and 12: 2.4 Communications Interface Commun
Page 13 and 14: 3 INSTALLING THE DDE 3.1 Fixing the
Page 15 and 16: Term 2-6 (0V) Term 2-6 (0V) Term 2-
Page 17 and 18: This page is intentionally blank DD
Page 19 and 20: Loop individual conductors Screened
Page 21 and 22: 4 DDE OPERATION General Notes & Con
Page 23 and 24: 4.2 PIN Level 1 - Disable PAT's [Us
Page 25 and 26: 4.4 PIN Level 3 - Administration Le
Page 27 and 28: 4.4.1 PAT Options This function ena
Page 29: The following table illustrates how
Page 33 and 34: 4.4.6 Alarm Options Facilities are
Page 35 and 36: 5 Commissioning the System 5.1 Powe
Page 37 and 38: 8. Change PIN numbers if required 9
Page 39 and 40: 6 TROUBLESHOOTING 6.1 System Self-t
Page 41 and 42: 7. Repair If for any reason you wis
Page 43 and 44: 8. Technical Specification 8.1 Dime
Page 45 and 46: 9. Change Record Issue Change Date

ParSec Data Display & Entry Panel (DDE ... - How do I

Create successful ePaper yourself

Delete template?

Save as template?