EDS470 - Bender

Safety instructions
The EDS470 is built according to the state-of-the-art and the recognised safety
engineering rules. During use, it is nevertheless possible that dangers will arise
to the life and limb of the user or of third parties, or that the EDS470 system or
other items of property may be impaired. The EDS470 must only be used for the
purposes for which it is intended when it is in perfect condition as regards safety
engineering aspects
Any faults which might impair safety must be eliminated immediately.
Inadmissable modifications, and the use of spare parts and additional devices
which are not sold or recommended by the manufacturer of the devices may
cause fires, electric shocks and injuries.
Explanation of symbols
and notes
The following designations and symbols for hazards and warnings are used in
BENDER documentation:
Danger !
This symbol means an immediate threat of danger to human life and health.
Failure to observe these warnings means that death, severe bodily injuries or
substantial damage to property will occur if the corresponding precautions are
not taken.
Warning
This symbol means a possible threat of danger to human life and health.
Failure to observe these warnings means that death, severe bodily injuries or
substantial damage to property may occur if the corresponding precautions are
not taken.
Caution
This symbols means a possible hazardous situation.
Failure to observe these warnings means that slight bodily injuries or damage to
property may occur if the corresponding precautions are not taken.
This symbol gives important information about the correct way to handle the
EDS470.
Failure to comply with this information may result in faults on the EDS470 or in
its environment.
This symbol guides you to application tips and particulary useful items of
information.
These will help you to make optimal use of all the functions on the EDS470
8
TGH 1243E/02.2000