Electronic Relays, Relay, HMI, Control, PLCs ... - Moeller Electric Parts

http://catalog.moeller.net Moeller HPL0211-2007/2008
Technical Data
Basic units
EASY512-DA-... EASY719-DA-...
Power supply
Rated operational voltage Ue V 12 DC (-15/+30%) 12 DC (-15/+30%)
Admissible range V DC 10.2…15.6 10.2…15.6
Residual ripple % F 5 F 5
Input current
Input current 115/230 V AC mA Normally 140 Normally 200
Voltage dips (IEC/EN 61131-2) ms 10 10
Heat dissipation W Normally 2 Normally 3.5
Digital inputs 12 V DC
Number 8 12
Inputs can be used as analog inputs 2 (I7, I8) 4 (I7, I8, I11, I12)
Status indication LCD display (if provided) LCD display (if provided)
Potential isolation
From power supply No No
Between digital inputs No No
From the outputs Yes Yes
Rated operational voltage Ue V DC 12 12
On 0 signal Ue V DC 4 (I1 – I8) 4 (I1 – I12)
On 1 signal Ue V DC 8 (I1 – I8) 8 (I1 – I12)
Input current on 1 signal
I1 to I6 mA 3.3 (at 12 V DC) 3.3 (at 12 V DC)
I7, I8 mA 1.1 (at 12 V DC) 1.1 (at 12 V DC)
I9 to I12 mA 3.3 (at 12 V DC)
Delay time from 0 to 1
Debounce ON ms 20 20
Debounce OFF ms Normally 0.3 (I1 – I6), 0.35 (I7, I8) Normally 0.3 (I1 – I6, I9, I10), 0.35 (I7, I8, I11,
I12)
Delay time from 1 to 0
Debounce ON ms 20 20
Debounce OFF ms Normally 0.3 (I1 – I6), 0.15 (I7, I8) Normally 0.4 (I1 – I6, I9, I10), 0.35 (I7, I8, I11,
I12)
Cable length (unscreened) m 100 100
Frequency counter 2 (I3, I4) 2 (I3, I4)
Fast counter inputs 2 (I1, I2) 2 (I1, I2)
Max. counter frequency kHz