Electronic Relays, Relay, HMI, Control, PLCs ... - Moeller Electric Parts
Electronic Relays, Relay, HMI, Control, PLCs ... - Moeller Electric Parts
Electronic Relays, Relay, HMI, Control, PLCs ... - Moeller Electric Parts
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
easy relay, easy MFD, easy <strong>Control</strong><br />
4/72<br />
Technical Data<br />
Ethernet Gateway, Upstream devices, SmartWire modules<br />
EASY2…<br />
<strong>Moeller</strong> HPL0211-2007/2008<br />
http://catalog.moeller.net<br />
EASY209-SE EASY223-SWIRE<br />
Power supply<br />
Rated operational voltage Ue V 24 (-15/+20 %) 24 (-15/+20 %)<br />
Admissible range V DC 20.4…28.8 20.4…28.8<br />
Residual ripple % 5 5<br />
max. current consumption (at 24 V DC) mA Normally 65 Normally 100 + n x 30<br />
n = Number of stations<br />
Voltage dips (IEC/EN 61131-2) ms 10<br />
Heat dissipation at 24 V DC W 1.7W<br />
Supply voltage UAUX (power supply for switching SmartWire<br />
elements, e.g. contactor coils)<br />
Rated operational voltage UAux V DC 24, –15 %, +20 % (Derating above > 40 °C)<br />
Admissible range 20.4…28.8<br />
at 45 °C: 21.0…28.8<br />
at 50 °C: 21.6…28.8<br />
at 55 °C: 22.2…27.6<br />
Max. current consumption (at 24 V DC) mA Normally 3<br />
Residual ripple % < 5<br />
Voltage dips (IEC/EN 61131-2) ms 10<br />
Short-circuit on the SmartWire end No. 3 A external protection necessary. MCB<br />
FAZ-Z3<br />
Supply voltage UGateway (supply voltage Gateway <strong>Electronic</strong><br />
and SmartWire element electronics)<br />
Rated operating voltage UGateway V DC 24 (-15/+20 %)<br />
Admissible range V DC 20.4 … 28.8<br />
Max. current consumption (at 24 V DC) A Normally 500 (normally 100 gateways +<br />
normally 25 per controller wiring module)<br />
Residual ripple % F 5<br />
Voltage dips (IEC/EN 61131-2) ms 10<br />
Heat dissipation at 24 V DC W Normally 14 (normally 4 gateways + normally<br />
0.6 per controller wiring module)<br />
Short-circuit on the SmartWire end Yes<br />
Protection against polarity reversal<br />
AS-I power supply Yes Yes<br />
LEDs<br />
Supply Front power LED: ON<br />
LED display Front-LED COM active: flashing<br />
RJ 45 socket, top No Activity: OFF, Amber: Half Duplex, Green: Full<br />
Duplex<br />
RJ 45 socket, bottom No Link: OFF, Amber: 10 MBit/s, Green: 100<br />
MBit/s<br />
Gateway ready for operation Ready: green<br />
Power supply SmartWire (contactor) UAUX: green<br />
Network Status (easyNET/CANopen) Bus: green/red<br />
Status SmartWire SmartWire: green<br />
Reset Front: via buttons > 2s<br />
Strain relief Via cable binders in retaining nipples<br />
Network<br />
Connection technique RJ45, 8-pole<br />
Potential isolation Yes, for UAUX, UGATEWAY, SmartWire<br />
Bus protocol a page 4/35<br />
Bus terminating resistors External, first and last station<br />
Bus addresses Factory settings Ethernet: IP address 0.0.0.0<br />
SUBNET mask: 255.255.0.0 Gateway address<br />
0.0.0.0 Remote address 0.0.0.0<br />
easy-NET: 2 … 8, adjustable via easyNet<br />
configutarion (station 1) or terminal mode<br />
CANopen: 1 … 126, adjustable via DIP<br />
switches<br />
SmartWire<br />
Connection types Plug, 6 pole<br />
Data/power cable 6 core flat-band cable<br />
Maximum cable length (gateway to last<br />
station)<br />
m 4<br />
Bus termination (last station) Termination connector<br />
Slave address allocation via SmartWire gateway<br />
Potential isolation none<br />
Station Max. 16, via SmartWire gateway<br />
For <strong>Moeller</strong> <strong>Electric</strong> Sales and Support call KMparts.com (866) 595-9616
Change language