FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
2. WIRING<br />
4. Connect the signal cable and the coaxial cable as shown below.<br />
Connect shield*<br />
to “E” terminal.<br />
SIGNAL CABLE<br />
(See section 2.2.4<br />
for how to fabricate.)<br />
* How to process the shield:<br />
Crimp-on<br />
lug<br />
Solder vinyl wire to<br />
shield, fasten crimp-on<br />
lug to vinyl wire, fasten<br />
crimp-on lug to the “E”<br />
terminal.<br />
For cable 05S0793<br />
(five-pair cable), cut<br />
unused wires and wrap<br />
them and the<br />
shield with vinyl tape.<br />
Vinyl wire<br />
Solder<br />
here.<br />
Shield<br />
COAXIAL<br />
CABLE**<br />
** How to fabricate<br />
the coaxial cable:<br />
1. Remove sheath<br />
50 mm.<br />
2. Remove insulator<br />
20 mm.<br />
3. Make length of<br />
conductor 20 mm.<br />
4. Cut shield to<br />
length of 10 mm<br />
and fix with the<br />
fixing plate.<br />
Antenna Coupler AT-<strong>15</strong>75, inside view<br />
19