FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. INITIAL SETTINGS<br />
Shared antenna configuration 2: R_ANT and WR2 antennas commonly shared<br />
Optional WR2 Board installed to watch on DSC general frequencies.<br />
1) Turn on [DIVIDER] in the [RT SETUP] menu.<br />
2) Set [RX ANT] on the [RT SETUP] menu to [CONNECT].<br />
3) Use the mini-pin assemblies (supplied) to make these connections:<br />
• Connect J4 to J5 on the RX FIL Board.<br />
• Connect J6 on RX FIL Board to J2 on WR1 Board.<br />
RANT<br />
T/R ANT<br />
AT-<strong>5075</strong>/<br />
AT-<strong>15</strong>75<br />
WR1 ANT<br />
J3<br />
J2<br />
J5<br />
J6<br />
J2<br />
J1<br />
J3<br />
J4<br />
J7<br />
J2<br />
J2<br />
42
Change language