FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
FS1575_2575_5075 Installation Manual E1 6-15-2012 - Furuno USA
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
3. INITIAL SETTINGS<br />
Full duplex configuration 2: R_ANT and WR1 (or WR2) antennas commonly shared<br />
Turn on [DIVIDER] in the [RT SETUP] menu. Set [RX ANT] on the [RT SETUP] menu to [CON-<br />
NECT].<br />
R_ANT<br />
T/R_ANT<br />
T/R_ANT<br />
J1<br />
J2<br />
J3<br />
J3<br />
J8<br />
R_ANT<br />
J2<br />
J1<br />
J3<br />
J4<br />
J5<br />
J7<br />
J6<br />
J2<br />
WR1_ANT<br />
J2<br />
J2<br />
3.5 Alarm Contact Signal<br />
Set the format of the alarm contact signal for normal close or normal open, with the jumper block<br />
J8 on the T-IF Board (05P0861).<br />
Jumper block J8<br />
Normal<br />
close<br />
Normal<br />
open<br />
3.6 I/O Data<br />
Data Input/Output Sentence, priority order<br />
Position info, Position fix Input GNS>GGA>RMC>GLL<br />
Time info Input ZDA>RMC<br />
DSC information, Expanded DSC Output DSC, DSE<br />
44