HBC-4301 Operators Manual - Novatech Controls

3. SPECIFICATIONS
3.1 Hardware Specifications
NATO Stock Number is 6685-66-145-0064
The central or main component of the HBC-4300 series is the HBC-4301 control case.
The case contains the notebook computer for transportation, and also: –
The main microcomputer
Thermocouple reading circuitry
Heater control
Backup keypad / display
Automatic vacuum control pumps and circuitry
Number of T/C inputs: 16 (expandable to 32)
Thermocouple type:
Temperature range:
Accuracy:
Type K or J
Up to 300C (600F)
+/- 1C
Number of heater zones inputs: 3 (expandable to 6 zones)
Type of controlled output:
Heater current (max.):
Heater power:
Phase angle and burst fired SCRs to operate infra-red
heater lamps or mats
10 Amps
7.2kW total at 240vac supply (2.4kW per zone)
3.3kW total at 110vac supply (1.1kW per zone)
Power supply safety protection: Earth leakage circuit protection on each heater
Vacuum sources:
Vacuum control (Pump #1):
Vacuum control (Pump #2):
Air supply:
Mains voltage supply:
Power:
Safety switch:
2 Air operated ejectors, down to -85 kPa
Manual on / off
Automatic, programmable or manual setting
150 to 800 kPa (Normal operation 500kPa)
200 l/m (both pumps running at 100%)
Single phase or 3 phase
85 to 265VAC 50/60 Hz (phase to neutral)
10Watts for controller plus heater power
Earth leakage detector on each zone (30mA)
Environmental Rating: Operating Temperature -25°C to 55°C
Relative Humidity 5% to 95% (non-condensing)
Page 11