HBC-4301 Operators Manual - Novatech Controls

Cycle memory:
Heater / T/C configuration:
Operator controls:
Hard copy of data:
Map
Graph
Other screens
Storage of finished cycle:
Import and Export
Retrieval of previous runs:
Manual power output over-ride:
Alarm identification:
Up to 100 pre-programmed cycles
Selectable on the keyboard or automatically selected from
the repair map.
Remote from control case using notebook PC
Local keypad / display for backup operation
Available any time during or after the end of the
cycle in colour or b&w including:
Zone / thermocouple positions & temperatures and
the hottest / coldest temperatures, process log.
Operator selected temperature / vacuum graph
including zoom views, plus:
Time of day, zone number, zone status, control
T/C number, acceptance T/C number, stage
number, set point, run time, vacuum level and job data
Other items can be printed during or after a run
including:
Adhesive profiles, Alarm report, Process log and
Temperature profile.
Completed run is saved on the hard disk or direct to a
network drive / floppy disk if available.
Other related files can be linked to the saved job such as-
Pictures
Text documents
Files can be imported or exported in text format that could
be read by MS Word or MS Excel format including:
Temperature profiles and previous temperature
graphs.
Selected by part number, operator, adhesive,
job description or date / time.
Data retrieved includes:
Zone temperature e /vacuum graphs, repair map,
alarms and warning messages, pictures and
documents. Graphs can be exported to Excel.
Auto-manual over-ride on each heater output
On screen display and hard copy print
Alarm status:
Temperature deviation
Thermocouple burnout
Thermocouple reversed
Vacuum over / under condition
Heater mat failure
Hardware failure
Communication failure
Page 13