HBC-4301 Operators Manual - Novatech Controls

"Version #.#.#" at the top of the splash screen shows the version of the computer software.
The report at the bottom of the splash screen during the start up shows the version of the
software running in the control case, and which control cases have been found on the network.
A status box at the bottom of the Main Menu screen will report the status of the connection.
Dots will be seen following the word ―Connecting‖ until communication is established.
If the HBC-4301 control case is not communicating with the PC the power output will be
inhibited from the zone outputs unless the zones are set to Manual power control.
If communications between the PC and the control case are lost during a temperature cycle
both the PC and the control case will sound an alarm.
4.3 Using The Menus On The Computer
The function keys or the cursor keys can be used to select the menu functions. The [ESC] key
is always used to exit back to the previous menu.
The tab key or the enter key can be used to move between the fields within a menu function.
A prompt line has been provided at the bottom of the some screen showing the selection of
keys available for the current cursor position.
A pointing device can also be used with the program, however once an operator is familiar
with the program it will be generally quicker to use the keys.
Page 17