instruction manual - Hangar 9
instruction manual - Hangar 9
instruction manual - Hangar 9
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Section 2: Joining The Wing Halves<br />
CONTINUED<br />
❑ 3.<br />
Locate the dihedral brace (also called the wing joiner).<br />
Using a ruler and pencil, mark the exact center of the<br />
brace as shown.<br />
❑ 5.<br />
Coat one half of the dihedral brace with epoxy up to the<br />
line. Note the orientation of the V of the dihedral<br />
brace. Install the epoxy-coated side of the dihedral<br />
brace into a wing half up to the line, making sure the V<br />
of the dihedral brace is positioned correctly as shown.<br />
❑ 4.<br />
Mix approximately 2 ounces of 30-minute epoxy. In<br />
this step, be sure to use plenty of epoxy. Using a scrap<br />
piece of wood, smear the epoxy into the wing joiner<br />
cavity of both wings. (Remember, use plenty of epoxy.)<br />
11
Change language