201303.pdf 36567KB Mar 22 2013 09:11:22 PM
201303.pdf 36567KB Mar 22 2013 09:11:22 PM
201303.pdf 36567KB Mar 22 2013 09:11:22 PM
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
DDS sweep generators Model<br />
4007B and Model 4013B generate<br />
sine and square waveforms from 0.1 Hz<br />
to 7 MHz and 0.1 Hz to 12 MHz, respectively.<br />
They output triangle/ramp waveforms<br />
from 0.1 Hz to 1 MHz and provide<br />
variable output voltages from 0 to 10V<br />
pk-pk into 50Ω or 20V pk-pk into an<br />
open circuit. Both models also provide<br />
linear and logarithmic sweep functions,<br />
variable dc offset from −4.5 to +4.5V<br />
(into 50Ω), and adjustable 20% to 80%<br />
duty cycle up to 1 MHz for square and<br />
triangle waveform output. A sync output<br />
is accessible on the front panel for outproductroundup<br />
GHz and 0 to 75 dB with a 5-dB step<br />
size from dc to 67 GHz. Depending on<br />
the configuration, the price range of the<br />
product is $5000 to about $10,000.<br />
Rohde & Schwarz,<br />
www.rohde-schwarz.com<br />
Digital power meters<br />
from Yokogawa boast<br />
0.1% accuracy<br />
↘<br />
The WT300 series of digital<br />
power meters deliver basic measurement<br />
accuracy of 0.1% of reading +<br />
0.2% of range, low-current measurements<br />
down to 50 μA, and high-current<br />
measurements up to 40A RMS. The<br />
instruments measure all ac and dc<br />
parameters and have a dc measurement<br />
range of 0.5 Hz to 100 kHz. A wide<br />
range of communication interfaces<br />
allows power meters to be integrated<br />
into laboratory test benches or automated<br />
test setups on production lines.<br />
USB and GPIB or RS-232 interfaces are<br />
standard, while Ethernet is optional.<br />
The basic price for the WT310 is $<strong>22</strong>10;<br />
pricing for the WT330 starts at $3875.<br />
Yokogawa, www.tmi.yokogawa.com<br />
TDK-Lambda extends<br />
programmable supply<br />
line<br />
↘<br />
The Z+ series of programmable<br />
dc power supplies now includes<br />
models that provide 200W of output<br />
power with an output voltage range of<br />
0 to 100V dc and output currents of up<br />
to 20A. The standard models are only<br />
3.27×2.76 in., and six units can be<br />
installed in an optional 19-in. rack<br />
housing. Options for front-panel output<br />
jacks and multiple-unit housings are<br />
available for bench applications. All<br />
models operate in constant-current or<br />
constant-voltage<br />
mode from an<br />
input of 85 to<br />
265V ac. They<br />
also feature USB,<br />
RS-232, and<br />
RS-485 interfaces,<br />
with optional<br />
LAN, GPIB, and<br />
isolated analog programming. The base<br />
price for the power supplies is $<strong>11</strong>85.<br />
TDK-Lambda Americas,<br />
us.tdk-lambda.com/lp<br />
ProPlus 1/f noise<br />
system integrates<br />
dynamic signal analyzer<br />
↘<br />
The NoiseProPlus 9812D waferlevel<br />
1/f noise-measurement system<br />
delivers accurate measurement up<br />
to 10 MHz, while its built-in DSA<br />
eliminates the need for external signalprocessing<br />
equipment. The system measures<br />
low-frequency noise characteristics<br />
of on-wafer and packaged semiconductor<br />
devices, including MOSFETs,<br />
BJTs, JFETs, diodes, and diffusion resistors.<br />
The 9812D handles up to 100V<br />
from the source-measure unit for highvoltage<br />
and/or low-current (