LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

More documents

Recommendations

Info

Note: The “Validation” file can have a maximum of 4096 (4K) records! Local Validation Filename: If the Validation Option is set to “Yes”, then this filename must be specified and the filename must be MSDOS 8.3 format Important Note concerning Validation Records: Validation is performed to match numeric entry data only, such as ID badges, and stock numbers. Every validation record must have a “unique” numeric value. In other words, although suffix characters are allowed, every validation record in the validation file must have only records with unique numeric ID fields. For instance, records: 01005RD and 01005AC are NOT unique in the numeric value and this is not allowed. Also, IDs: 01005A and 0001005 are not unique for the same reason! Since only the “Numeric” value must be unique, then 010050 and 00001005 would be unique. This limitation is due to the file-parsing algorithm that stores every ID as a numeric value for quick access. This immensely speeds lookups compared to a string compare algorithm. If prefix characters are used, then “Fixed length Field” validation mode must be selected and the data must be “fixed length. Thus, an ID of AC10095 can be used but every ID field in every record must be the exact same length and the numeric digit count must always be constant! Terminal: Break Bell Times Entry Screen The Break Bell Times Entry Screen allows the user to specify up to 32 break bells during the day. For instance, this will allow 4 six-hour shifts to have: Start-of-Shift Bell Morning Break Start Bell Morning Break End Bell Lunch Start Bell Lunch End Bell 18 • Turn-Key Configurator Entry Screens-In Detail LINX 7-5 Turn-Key Application User's Guide
Entry Fields: Afternoon Break Start Bell Afternoon Break End Bell End-Of-Shift Bell Bell Control Line Option: This allows the user to select which control line is used for the alarm Bell. The default line is #2. Bell Duration: This setting controls the length of time that the bell will sound (in seconds). The default is 10 seconds. Bell Times: Thirty-two fields are available for Bell time entry. The entry MUST be in 24-hour format and must always have 5 characters. This indicates that any hour less than 10 must have a leading zero (ie: 09:00). Entries must be made in order and skipping fields is not allowed! Terminal: Door/Control Line Configuration Screen The Door/Control Line Configuration Screen is used to select the control line for the Door and the duration that the control line will be active. Entry Fields: Door Control Line: This selects the control line used to activate the Door or other Validation indicator device. The default line is #1 (the relay). Door Active Time: This defines the number of seconds that the control line will be active. In other words, the time the door will be open. LINX 7-5 Turn-Key Application User's Guide Turn-Key Configurator Entry Screens-In Detail • 19
Page 1 and 2: LINX 7-5 Turn-Key Application User'
Page 3 and 4: Contents Overview: 1 What is the Tu
Page 5 and 6: Overview: What is the Turn-Key Appl
Page 7 and 8: • Each Submenu defined can also h
Page 9 and 10: • Validation response can be sele
Page 11 and 12: Note This should never be changed u
Page 13 and 14: Main Status Monitor Window: Once co
Page 15 and 16: Saving Unsolicited Data Each time y
Page 17 and 18: File Transfer Utility The LINX File
Page 19 and 20: Turn-Key Configurator Entry Screens
Page 21: Terminal: Program Constraint Option
Page 25 and 26: The alignment of the display prompt
Page 27 and 28: The Application Input Configuration
Page 29 and 30: Terminal: MSR Input Qualification S
Page 31 and 32: Note: Whatever name has been define
Page 33 and 34: Prompt for Finger Scan: This option
Page 35 and 36: Fixed Length Field Mode: Start Posi
Page 37 and 38: Terminal: Record Validation Control
Page 39 and 40: Note: Any day that does not have va
Page 41 and 42: Terminal: End of Configuration Scre
Page 43 and 44: However, if not, then a periodic Ho
Page 45 and 46: The Host Validation Record Extract
Page 47 and 48: Sample Applications Sample #1: A sm
Page 49 and 50: Door Access enabled. Local Storage
Page 51 and 52: Default used for Bar Code input qua
Page 53 and 54: Note: Extracted Field #2 is employe
Page 55 and 56: Summary of the current configuratio
Page 57 and 58: COMInDataLen=1 UseBells=0 UseDoor=1
Page 59 and 60: +MinFKey=1 +MaxFKey=10 +FKeyInRecor
Page 61 and 62: +FKeyControls[11].Line2=Prompt Line
Page 63 and 64: SyncTime=03:00 HostValidationMode=0
Page 65 and 66: For each task, an employee must fir
Page 67 and 68: Main prompts - Line #1 will display
Page 69 and 70: Note: “Format as part of record
Page 71 and 72: F4 (STOP TASK) prompts.. IN (Clock
Page 73 and 74:
No Filtering - defaults used.. Use
Page 75 and 76:
Above: Summary of Current configura
Page 77 and 78:
Press F4 to actually start the JOB.
Page 79 and 80:
Define Desired BELLs.. Set Door (In
Page 81 and 82:
First submenu (START JOB submenu1)
Page 83 and 84:
Bar Code defaults used.. Define thi
Page 85 and 86:
Submenu 1-1 (EMP-ID) Extract field
Page 87 and 88:
Submenu 1-2 (JOB#): Allow Bar Code,
Page 89 and 90:
Submenu 1-2(Job #) No badge filteri
Page 91 and 92:
Submenu 1-3(Proc#) Allow Bar Codes,
Page 93 and 94:
Submenu 1-3(Proc#): Qualifications
Page 95 and 96:
Submenu 1-4(Start JOB): Define prom
Page 97 and 98:
Submenu 1-4(Start-JOB): Inputs qual
Page 99 and 100:
Submenu 1-4(Start JOB): No Time/Day
Page 101 and 102:
Submenu 2-1(ID): Define prompts for
Page 103 and 104:
Submenu 2-1(ID): All inputs qualifi
Page 105 and 106:
Submenu 2-1(ID): No Time/day valida
Page 107 and 108:
Submenu 2-2(Job Number): Default Ba
Page 109 and 110:
Submenu 2-2 (Job Number): Define re
Page 111 and 112:
Submenu 2-3(End Job): Use bar code
Page 113 and 114:
Submenu 2-3(End Job): Define record
Page 115 and 116:
The LINX7-5 control file:”Lx75_TK
Page 117 and 118:
Host application control file: ”P
Page 119:
LINX 7-5 Turn-Key Application User'
show all

LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?