LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

More documents

Recommendations

Info

Terminal: Main Prompts Screen The Application Main Display Prompts Screen defines the “MAIN” prompts that are displayed to the terminal user. Top and bottom lines can be specified with formatting. Both of these lines can have Left, Center or Right alignment. This display can either be a MENU or Non-Menu display and is selectable via radio buttons. Please Note: The selection of Non-Menu or Menu is critical on determining how the application operates. A Menu application can have multiple entry devices with unique validation fields. Whereas a Non-Menu application can only use the same validation field and badge ID. However, the Non-Menu can be used when no validation is required. This distinction will be further clarified in the sample programs later in this guide. Entry Fields: Display Line #1: This is the entry field for the first line of the Main application display prompt. Text and format code can be entered to provide numerous fields of terminal information on the display. The available formatting codes can be viewed by clicking on the “Format Help” button. These options are shown in the following Formatting Help Screen: The alignment of the display prompt can be either: Left, Center or Right. This Prompt Line MUST be defined! Display Line #2: This is the entry field for the optional second line of the Main application display prompt. Text and format code can be entered to provide numerous fields of terminal information on the display. The available formatting codes can be viewed by clicking on the “Format Help” button. These options are shown in the following Formatting Help Screen: 20 • Turn-Key Configurator Entry Screens-In Detail LINX 7-5 Turn-Key Application User's Guide
The alignment of the display prompt can be either: Left, Center or Right. This Prompt Line is optional! Terminal: Formatting HELP Screen Menu Option: These radio buttons define whether this particular display defines a “Menu” or a “Non-Menu” display. A Menu will have submenus that can be accessed via “Menu keys” which must be either numeric or Function keys. The Menu type is the most configurable and consequently, will create a larger configuration file. The display can define up to 8 sub-menus and each sub-menu may have up to 4 lower submenus defined. Each Menu can have unique prompts, unique badge formatting and unique validation options, which all together makes this option very configurable. LINX 7-5 Turn-Key Application User's Guide Turn-Key Configurator Entry Screens-In Detail • 21
Page 1 and 2: LINX 7-5 Turn-Key Application User'
Page 3 and 4: Contents Overview: 1 What is the Tu
Page 5 and 6: Overview: What is the Turn-Key Appl
Page 7 and 8: • Each Submenu defined can also h
Page 9 and 10: • Validation response can be sele
Page 11 and 12: Note This should never be changed u
Page 13 and 14: Main Status Monitor Window: Once co
Page 15 and 16: Saving Unsolicited Data Each time y
Page 17 and 18: File Transfer Utility The LINX File
Page 19 and 20: Turn-Key Configurator Entry Screens
Page 21 and 22: Terminal: Program Constraint Option
Page 23: Entry Fields: Afternoon Break Start
Page 27 and 28: The Application Input Configuration
Page 29 and 30: Terminal: MSR Input Qualification S
Page 31 and 32: Note: Whatever name has been define
Page 33 and 34: Prompt for Finger Scan: This option
Page 35 and 36: Fixed Length Field Mode: Start Posi
Page 37 and 38: Terminal: Record Validation Control
Page 39 and 40: Note: Any day that does not have va
Page 41 and 42: Terminal: End of Configuration Scre
Page 43 and 44: However, if not, then a periodic Ho
Page 45 and 46: The Host Validation Record Extract
Page 47 and 48: Sample Applications Sample #1: A sm
Page 49 and 50: Door Access enabled. Local Storage
Page 51 and 52: Default used for Bar Code input qua
Page 53 and 54: Note: Extracted Field #2 is employe
Page 55 and 56: Summary of the current configuratio
Page 57 and 58: COMInDataLen=1 UseBells=0 UseDoor=1
Page 59 and 60: +MinFKey=1 +MaxFKey=10 +FKeyInRecor
Page 61 and 62: +FKeyControls[11].Line2=Prompt Line
Page 63 and 64: SyncTime=03:00 HostValidationMode=0
Page 65 and 66: For each task, an employee must fir
Page 67 and 68: Main prompts - Line #1 will display
Page 69 and 70: Note: “Format as part of record
Page 71 and 72: F4 (STOP TASK) prompts.. IN (Clock
Page 73 and 74: No Filtering - defaults used.. Use
Page 75 and 76:
Above: Summary of Current configura
Page 77 and 78:
Press F4 to actually start the JOB.
Page 79 and 80:
Define Desired BELLs.. Set Door (In
Page 81 and 82:
First submenu (START JOB submenu1)
Page 83 and 84:
Bar Code defaults used.. Define thi
Page 85 and 86:
Submenu 1-1 (EMP-ID) Extract field
Page 87 and 88:
Submenu 1-2 (JOB#): Allow Bar Code,
Page 89 and 90:
Submenu 1-2(Job #) No badge filteri
Page 91 and 92:
Submenu 1-3(Proc#) Allow Bar Codes,
Page 93 and 94:
Submenu 1-3(Proc#): Qualifications
Page 95 and 96:
Submenu 1-4(Start JOB): Define prom
Page 97 and 98:
Submenu 1-4(Start-JOB): Inputs qual
Page 99 and 100:
Submenu 1-4(Start JOB): No Time/Day
Page 101 and 102:
Submenu 2-1(ID): Define prompts for
Page 103 and 104:
Submenu 2-1(ID): All inputs qualifi
Page 105 and 106:
Submenu 2-1(ID): No Time/day valida
Page 107 and 108:
Submenu 2-2(Job Number): Default Ba
Page 109 and 110:
Submenu 2-2 (Job Number): Define re
Page 111 and 112:
Submenu 2-3(End Job): Use bar code
Page 113 and 114:
Submenu 2-3(End Job): Define record
Page 115 and 116:
The LINX7-5 control file:”Lx75_TK
Page 117 and 118:
Host application control file: ”P
Page 119:
LINX 7-5 Turn-Key Application User'
show all

LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

Create successful ePaper yourself

Delete template?

Save as template?