LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

Separator Character Mode: Field Separator Character:.. This field
specifies the special separator character used to extract the data. Default
is’,’ (comma).
Separator Character Mode: Field Number:. This field indicates the
field number of the data to extract. Range 1-110. Default is ‘1’.
Terminal: Record Validation Options Screen
The Validation Options Screen provides more options for entry data validation. An
option is available to store records without validation when the Host has gone
Offline and the record required validation via an active Host. Also validation can
further be validated against a “valid day and time” table. This provides a double
check on Badges that are not allowed access during certain days and/or times.
Entry Fields:
In “Online Mode”, If Host is “Offline:- no Validation Required:
This checkbox should be checked if the entry data is to be just stored
without any validation when the Host goes “Offline” in “Online
Mode”. This ONLY applies if the entry data record normally requires
validation.
Time and Date Accessibility Required: This checkbox should be
checked if the validation record is also to be checked for valid day and
time access for any ID submitted for validation. The validation Time &
Day data MUST be formatted as follows within the validation record:
Day Fields:
MON TUES WED THU FRI SAT SUN
Time Fields [StartEnd]
07301600073016000730160007301600073016000800120000000000
This indicates that this ID would have access on Monday to Friday from 7:30AM to
4:00PM and from 8:00AM to 12:00Noon on Saturday with NO access on Sunday.
34 • Turn-Key Configurator Entry Screens-In Detail LINX 7-5 Turn-Key Application User's Guide