LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

Host configuration is complete. PC-TK.cfg file has been generated into the default
directory. Configuration is now completed!
Sample2 – Host Data file created:
00559[EntryDoor2:CLOCKIN]@070049:071307
00559[Station23:EMP-ID]@070830:071307
1000468[Station23:TASK-ID]@070839:071307
00559[Station23:START-TASK]@070846:071307
00559[Station23:END-TASK]@110225:071307
00559[EntryDoor2:CLOCKOUT]@163003:071307
Notice the use of Function key names and Terminal names to indicate task and entry
point. Clock Ins and Outs are done at the door. Tasks are done at Station numbers.
Using the station number the post-processing program can determine the task and the
pay rate assigned to that task. Thus the employee “00559” can be paid for the
amount of time spent on the task ID 1000468.
Sample #3:
This next sample application will create a DEMO “Work-In-Process” application
using MENU mode. This WIP program will provide 2 options on the main menu:
“Start JOB” and “End JOB”. These will be selected by pressing F1 and F2
respectively. Once a submenu has been entered several more options will be
available to the employee.
Start JOB: The user will press “F1” key to enter the submenu which will display:
“F1:ID F2:JOB# F3Proc# F4:Start JOB
The worker will first press F1 and swipe his identity badge. Then Press F2 and scan a
JOB number. Once this is done, the worker will Press F3 and then scan a Process
number. Now the JOB information has been entered and the worker will
72 • Sample Applications LINX 7-5 Turn-Key Application User's Guide