LINX 7-5 Turn-Key Application User's Guide - LINX Data Terminals

However, if not, then a periodic Host connect will retrieve the records
stored in the terminal queue. Select the appropriate mode.
If Periodic Host Connect used, select Interval: If Periodic Host
connect file retrieval method has been selected, then this field should
be used to define the “Period” in minutes of the connection interval.
Default is 15 minutes.
Schedule Time Syncs: This checkbox is enabled if time
synchronization is desired. Normally this should always be checked.
Set Sync Time: This field is initialized with the time for the daily time
synchronization event. This must be set in 24hour format. Default is
:0300AM.
Schedule File Uploads from the Terminal: This checkbox should be
enabled if files at to be periodically uploaded to the terminal. A
maximum of 3 files may be uploaded. These files are selected in the
spaces provided.
Schedule File Upload Time: This field is used to specify the time to
perform the daily upload of the designated files to the terminal. This
must be in 24 hour format.
Schedule File Downloads to the Terminal: This checkbox should be
enabled if files at to be periodically downloaded to the terminal. A
maximum of 3 files may be uploaded. These files are selected in the
spaces provided.
Schedule File Download Time: This field is used to specify the time to
perform the daily download of the designated files to the terminal. This
must be in 24 hour format.
PC Host: Validation Data Options Screen
The Validation Data Options screen is used to select various validation options for
the Host application. Validation data source can be selected, validation response type
and an option to extract data from the validation record is available.
LINX 7-5 Turn-Key Application User's Guide Turn-Key Configurator Entry Screens-In Detail • 39