Operator dialogue terminals - Trinet

References 1
Operator
dialogue terminals 1
Magelis graphic terminals
802988
Fipway network/Fipio bus connection cables and accessories (1)
Description Type Condition of use Length
m
Reference
Weight
kg
Fipio PCMCIA card Agent function Fipio on XBT F – TSX FPP 10 0.110
1
TSX FPP p0
Fipway PCMCIA card – Fipway on XBT F – TSX FPP 20 0.110
Trunk cables
8 mm, shielded
twisted pair, 150 Ω
In normal environment (2)
and inside buildings
100 TSX FP CA 100 5.680
200 TSX FP CA 200 10.920
500 TSX FP CA 500 30.000
8 mm, shielded
twisted pair, 150 Ω
In harsh environment (3) 100 TSX FP CR 100 7.680
and outside buildings or in
a daisy chain (3)
200 TSX FP CR 200 14.920
521442
500 TSX FP CR 500 40.000
Dust and damp-proof
junction box
Zamac
IP 65
Trunk cable tap-off – TSX FP ACC 4 0.660
TSX FP ACC 4
Line terminators
(sold in lots of 2)
– – – TSX FP ACC 7 0.020
521441
Female connectors,
9-way SUB-D type
Zamac – – TSX FP ACC 2 0.080
TSX FP ACC 7
Black polycarbonate
IP 20
– – TSX FP ACC 12 0.040
802987
Tap-off connection cables
Description Usage Length
From
To
m
Cables for PCMCIA card TSX FPP 10/20
card
TSX FP ACC 4 junction
box
Reference
Weight
kg
1 TSX FP CG 010 0.210
3 TSX FP CG 030 0.410
TSX FP CG 0p0
Tap-off cables
TSXFPACC2
or
TSXFPACC12
connector
TSX FP ACC 4 junction
box
100 TSX FP CC 100 5.680
200 TSX FP CC 200 10.920
500 TSX FP CC 500 30.000
(1) The characteristics and performance of the Fipio bus or Fipway network are dependent on the above TSX FP accessories
being used.
(2) Normal environment:
b without special environmental constraint,
b operating temperature between + 5 °C and + 60 °C,
b fixed installations.
(3) Harsh environment:
b resistance to hydrocarbons, industrial oils, detergents and solder chips,
b relative humidity up to 100%,
b saline environment,
b extreme variations in temperature,
b operating temperature between - 10 °C and + 70 °C.
b mobile installations, cables tested in accordance with the standard VDE 472 part 603/H:
v for use in a daisy chain, minimum radius of curvature of cable = 75 mm min.,
v for use on a gantry, providing certain installation conditions are met (acceleration, speed, length, etc.), please consult your
Regional Sales Office,
b not suitable for use on robots or multi-axial applications.
Connections:
page 1/42
1/43