Operator dialogue terminals - Trinet

Description (continued) 2
Magelis
iPC industrial PCs 2
Smart iPC and Compact iPC ranges
1
2
3
4
Description of the Compact iPC
Front panel with touch screen MPC KT5 pNAA 00p
The front panel with touch screen MPC KT5 pNAA 00p on industrial PCs comprises:
1 A 15" color TFT active-matrix XGA LCD screen (maximum display area
1024 x 768 points) with high-definition analog touch panel.
2 An aluminum alloy front panel with IP 65 membrane (mounted on a hardened steel
frame).
3 Two LEDs labeled:
b ON, with the following meanings depending on the color:
v green: PC switched on
b DISK, green: accessing IDE bus (accessing hard disk, etc.)
2
4 A cover plate which provides IP 65 protection when in position and gives access
when removed to:
b A USB connector
b A "pencil point" RESET button for restarting the processor
Lower and left-hand sides
12
11
All expansion slots and connection elements are accessible from the rear of the PC,
with the following elements located on the lower and left- and right-hand sides:
1 Connector for plugging in the a 100 to 240 V power cable
10
9
2 Twovents,eachwithananti-dustfilterandfan
3 Slot for additional Compact Flash memory card
4 25-pin female SUB-D connector marked PRINTER for bi-directional parallel link
5 Four 9-pin male SUB-D connectors labeled COM1, COM2 and COM3 for serial
links (see details on page 2/8)
6 Two USB connectors
7 Two mini-DIN PS/2 connectors for external keyboard and pointing device
8 Slot for 2 additional PCMCIA cards
1 2 3 4 5 6 7 8
9 RJ45 connector for Ethernet 10/100 Mbps link
10 Slot for PCI bus expansion card
11 CD-ROM drive
12 31/2"floppydiskdrive
2/7