Recording - long-time monitoring - large-digit displayEBS 9M (nine channels)new !! With remote operation via telephone netsUpdate (for registered userswith declaration of serial number of original version)Recorder functionIn connection with a PC this software makes up a low-price andcomfortable multi-channel acquisition program for measuringdata. The software supports the following measuring systems,level converter and measuring components.Meas. system Level converter ComponentsEASYBUS EBW1, EBW64 EASYLOG, EBT, EBH,EBW240, EB2000MC EBNGRS485 GRS485 GIA10, GIA1000...,GIR1002...GMH-series GRS3100, GRS3105 GMH3xxxA combination of the various measuring systems is not possible.General advise:Data are read via the serial interfaces ‘COM 1’, ‘COM 2’, 'COM 3' or'COM 4' of your personal computer - no module slot at the PC required!In combination with a standard modem and an EASYBUS modem(MODEM1000. MODEM2000HS or MODEM3000GSM) a remoteapplication can be set up.(analog to EASYLOG remote operation system, p.r.t. page 67)Our EBS 9M software includes 2 functional modules for “recording/large digit display” and "data memory" as well as a SETUPprogramm to select the language (german or english) required.Module „Recording/large-digit display“Measuring values displayed as y/t-diagram or digital indicationadjustable scan rate: 0.5s, 1s, 2s, 5s, 10s, 30s, 1min, 2min, 5min,10min, 30min, 1h, 2h, 5h.t-axis (time): • display in minutes, hours or days• automatic scaling• scrolling functiony-axis (meas. value): • automatic scaling• adjustable display range• axis identification possibleMiscellaneous: • switch over from y/t-diagram to digital display• entering of a comment line• automatic system initialisation• individual legend for each diagram• storing of measuring values - recording timeup to several years• adjustable start and stop conditionsModule „data display“Loading of stored measuring values and display as y/t-diagramt-axis (time): • automatic scaling can be switched on/off• display range freely selectable• grid selectabley-axis (meas. value): • automatic scaling can be switched on/off• display range freely selectable• grid selectableMiscellaneous: • line width and colour freely selectable• identification of meas. points can beselectedOutput to printer:The “data display” module can be used together with the modules“large digit display/recorder”. Therefore, it is possible any time tocheck the measuring values already stored <strong>without</strong> having to interruptthe on-going recording process. The EBS 9M stores all settings andmeasuring values in the ASCII code so that they can be read andprocessed by almost all standard software programmes (eg. Excel).configuration as large-digit display resp. combinedrecorder/large-digit display also possibleConfiguration of connected devicesData displaySystem requirements: as of Pentium 10<strong>08</strong> MB RAM, approx. 7 MB free on hard disk, CD-ROM drive, VGAgraphics card with resolution 800 x 600 or better, Windows 95,Windows 98, NT4.0 or better, serial interface, mouse40
Microprocessor-digital thermometerMicro processor-digital display for standard signalsIn accordance withEN50<strong>08</strong>1-1 andEN50<strong>08</strong>2-2 forunrestricted use inresidential and industrialareasMicroprocessor-digital thermometer Pt 100 4-wire,min./max. value memory, RS 485 interfaceGIA 1000 Pt100Specification:Measuring range: -199,9 ... +650,0 °C (standard)-199,9 ... +999,9 ° (please specify when ordering)Resolution: 0,1 °CAccuracy: < 0,03 % S ± 1 digitMeasuring rate: approx 3 measurements / sec.Linearisation: parameter memorized digitallySensor: not included (please order separately) see page 88Pt 100, 4-wire (any probe or cable length possible wihout recalibration).Probes fully interchangeable (any Pt 100 sensor in 2 or 3-wire designexisting at customers’ can also be connected, as GIA 1000 Pt 100 isequipped with a digital zero-offset adjustment)ilter: plausibility check of value indicated and input signal allowing faultelimination (indication delay approx. 1.5 sec). If you do not want thisfeature but require faster indication (3 to 4 measurements per second),please make your selection accordingly.Min./Max. value memory: both the highest and lowest value recordedduring operation can be called up by pressing a button. Deleting of min./max. values memorized and beginning of new memory recordings bypressing min./max value button for a few seconds.ault indication: probe damage, probe short-circuit, values no longerwithin measuring range.Self-diagnosis: permanent self-diagnosis of device to ensure troublefreeoperation by means of integrated precision reference resistorInterface: compatible to RS 485 (up to 16 devices linkable via one 2-wireinterface). Connection to RS 232 by means of optional GRS485.Software: for long-term monitoring, recorder, large-digit display, datamemory (p.r.t. special accessories on page 40).Display: 4 digit red LED, 13 mm highAnalog output [optional]: 4-20mA, 0-20mA or 0-10V, scale to beselected individually, electrically isolated.ront: membrane keyboard IP65. Additional sealing for panel-mounting (optional)Housing: standard rack type housing 48 x 96 x 100 mm (H x W x D)Panel cutout: 43 x 90.5 mm (H x W)Clamping terminals: screw-type/plug-in terminalsWorking temperature: 0 to 50° C (permissible ambient temperature foroperation of GIA 1000 Pt 100). If temperatures fall below 0°C, device mayhowever be used for permanent operation (please contact us).Storage temperature: -20 to +70°CPower supply: standard 230 V AC 50/60 Hz (standard, others availableagainst upcharge)Power input: approx. 3 VAOptions - against upcharge:12VDC: Power supply: 12VDC 1)24VDC: Power supply: 24VDC 1)12VAC: Power supply: 12VAC24VAC: Power supply: 24VAC115VAC: Power supply: 115VACAAG020: Analog output 0-20mA 1)(scale freely adjustable), electr. isolatedAAG420: Analog output 4-20mA 1)(scale freely adjustable), electr. isolatedAAG010: Analog output 0-10V 1)(scale freely adjustable), electr. isolated1) or analog output with option 12VDC o. 24VDC add. upchargeTARA: Tare function (only for GIA1000NS)Accessories: p.r.t. GIA1000NSSuitable temperature probe: eg.GT 1002 Pt100, 4-wire (p.r.t. p. 88)reely adjustable digital display for any type of meas. transducer,min./max. value memory, tare function, RS 485 interfaceGIA 1000 NSSpecification:Measuring range: -1999 ... +9999 digitScale for first and last value freely adjustableResolution: any decimal point possibleAccuracy: ± 0.1% S ± 1 digitMeasuring rate: approx 3 measurements / sec.Standard signal input: (freely selectable)0 to 20 mA (Ri=50 Ohm) 0 to 1 V (Ri=30 kOhm)4 to 20 mA (Ri=50 Ohm) 0 to 10 V (Ri=300 kOhm)2-, 3- or 4-wire.Other input values or extra high Ri upon request.Power supply for sensor: integrated, electrically isolated powersupply unit for measuring transducer: 18 V DC +/-5 %, 20 mA.ilter: plausibility check of value indicated and input signal allowing faultelimination (indication delay approx. 1.5 sec). If you do not want thisproperty but require faster indication (3 to 4 measurements per second),please select accordingly.Min./Max. value memory: both the highest and lowest value recordedduring operation can be called up by pressing a button. Deleting of min./max. values memorized and beginning of new memory recordings bypressing min./max value button for a few seconds.Tare function: (upon request): by pressing a front-side button, the valueindicated can be set to zero, process reversible, ie nominal value can becalled up again. Please specify when ordering.ault indication: probe damage, probe short-circuit, values no longerwithin measuring range.Self-diagnosis: permanent self-diagnosis of unit for trouble-freeoperationInterface: compatible to RS 485 (up to 16 devices linkable via one 2-wireinterface). Connection to RS 232 by means of optional GRS485.Software: for long-term monitoring, recorder, large-digit display, datamemory (p.r.t. special accessories on page 40).Display: 4 digit red LED, 13 mm highAnalog output [optional]: 4-20mA, 0-20mA or 0-10V, scale to beselected individually, electrically isolated.ront: membrane keyboard IP65. Additional sealing for panel-mounting (optional)Housing: standard rack type housing 48 x 96 x 100 mm (H x W x D)Panel cutout: 43 x 90.5 mm (H x W)Clamping terminals: screw-type/plug in terminals,Working temperature: 0 to 50° C (permissible ambient temperature foroperation of GIA 1000 NS). If temperatures fall below 0°C, device mayhowever be used for permanent operation (please contact us).Storage temperature: -20 to +70°CPower supply: standard 230 V AC 50/60 Hz (standard, others availableagainst upcharge)Power input: approx. 3 VAOptions - against upcharge: p.r.t. GIA1000PtAccessories:GRS 485 interface converterconverting RS485 to RS232 (p.r.t. page 47)GRS 485 ISO galv. getrennter interface converterRS485 to RS232 - mit Datenflußrichungserkennung (p.r.t. page 47)(ür die Erstellung von eigenen Programmen sollte der GRS485ISO verwendet werden)EBS 9M Windows-software 9-channel (p.r.t. p. 40)EASYControl Windows-software for recording, monitoringand archiving of values obtained from up to 15 GIA/GIR devices (p.r.t. p. 68)GGD 4896 additional sealing for panel mounting IP6541