Catalog 08-2001 without prices - nl3prc

pH-measuring transducerwith on site display and electrically isolationRedox-measuring transducerwith electrically isolationGPHU 014 MPwith automatic and manual temperature compensation,(meas. transducer without electrode and temp. probe)Specification:Measuring range: 0.00 to 14.00 pHAccuracy: 0.02 pH ±1 digitOutput signal: 4 - 20 mA (2-wire - standard)0 - 10 V (3-wire - option)Electric isolation: output electrically isolatedAuxiliary energy: 12 ... 30 V DC18 ... 30 V DC (for option 0-10V)Perm. impedance (at 4-20mA): R A [Ð] = Uv [V] - 12V / 0.02 APermissible load (bei 0-10Volt): R L > 3000 ÐElectrode: any pH electrode of our program is suitable.(electrode not included in scope of supply)Input resistance: 10 12 OhmElectrode socket: Cinch-socket (standard)Optionally available with BNC- and DIN-socket (please specify on your order)Temperature compensation: 0 ... 100°C,manually via 3 keys or automatically via external Pt1000 sensor.Calibration: via 3 keys and integrated LCDTemperature sensor socket: 3.5mm phono plug or banana plug forthe DIN-socket type.Display: approx. 10 mm high, 3½-digit LCD-displayWorking temperature measuring transducer: 0 ... +50 °CStorage temperature: -20 ... +85 °CElectric connection: elbow-type plug acc. to DIN 43650 (IP65),max. wire cross section: 1.5 mm², wire diameter from 4.5 to 7 mmHousing: ABS (IP65) with the exception of electrode and temperatureconnection sockets. (cpl. IP65 upon request)Dimensions: 82 x 80 x 55 mm (H x W x D)Mounting: with fixing holes for wall mounting (accessible after removalof cover)Mounting distance: 70 x 50 mm (W x H)ixing screws: max. schaft-Ø 4 mmOrdering type (examples):GPHU 014 MP / BNC, AV010:GPHU014MP with BNC electrode socket and 0-10V outputsignalOptions - upcharge:AV010: output singal 0-10VBNC: electrode socket: BNCDIN: electrode socket: DINAccessories:Pt1000-temperature probe (p.r.t. page 13, 88)GE 100 standard electrode, cinch-plug0GE 107 special pH electrode with integratedPt1000-temperature sensor, DIN-plugPG 13,5 thread (suitable for any electrode)GAK 1400 (working and calibration set - p.r.t. page 33)or additional electrodes and accessories p.r.t. page 13, 33 and 88GRMU 2000 MPSpecification:Measuring range: ±2000 mVor special limited measuring ranges acc. to customer specification!Accuracy: 0.2 %Output signal: 4 - 20 mA (2-wire - standard)0 - 10 V (3-wire - option)Electric isolation: output electrically isolatedAuxiliary energy: 12 ... 30 V DC18 ... 30 V DC (for option 0-10V)Perm. impedance (at 4-20mA): R A [Ð] = Uv [V] - 12V / 0.02 APermissible load (bei 0-10Volt): R L > 3000 ÐElectrode: redox electrode GE105(electrode not included in scope of supply!)Input resistance: 10 12 OhmElectrode socket: Cinch-socket (standard)Optionally available with BNC-socket (please specify on your order)Option: "on site display: approx. 10 mm high, 3½-digit LCD-displayWorking temperature measuring transducer: 0 ... +50 °CStorage temperature: -20 ... +85 °CElectric connection: elbow-type plug acc. to DIN 43650 (IP65),max. wire cross section: 1.5 mm², wire diameter from 4.5 to 7 mmHousing: ABS (IP65) with the exception of electrode and temperatureconnection sockets. (cpl. IP65 upon request)Dimensions: 82 x 80 x 55 mm (H x W x D)Mounting: with fixing holes for wall mounting (accessible after removalof cover)Mounting distance: 70 x 50 mm (W x H)ixing screws: max. schaft-Ø 4 mmOrdering type (examples):GRMU 2000 MP / BNC, VO:GRMU2000MP with BNC electrode socket and on site displayOptions - upcharge:VO: on site displayAV010: output singal 0-10VBNC: electrode socket: BNCMB...: limited measuring range (please state the desired range)Accessories:GE 105 redox electrode, cinch-plugPG 13,5 thread (suitable for any electrode)or additional electrodes and accessories p.r.t. page 33Conductivity measuringtransducerOutput signal: 0-1VPlease contact us!87