Catalog 08-2001 without prices - nl3prc

Programmable, electrically isolated universaltransmitter GITT01GITT01 *1GITT01 - EX *1(Ex-protection: EEx ia IIC T6)*1= Transmitter can either be programmed by customeror by our works - please specify type upon order. (e.g.GITT01, NiCr-Ni (type K), 4...20mA = 0 - 300°C)Accessories:Snap-on mounting(rail adapter for snap-on to top-hat rail)Programming tool for GITT01The programming tool consists of:- configurations software (3,5 " disk, multilingual, online help)- connection cable, RS 232-C (approx. 1m long, 9-pin Dsub-plug)- operating manualSpecification:Input signal: can be universally programmed to- Resistance thermometer: max. meas. range min. meas. spanPt100 acc. to IEC 751 -200 ... +850 °C 10 KPt500 acc. to IEC 751 -200 ... +250 °C 10 KPt1000 acc. to IEC 751 -200 ... +250 °C 10 KNi100 acc. to DIN 43760 -60 ... +180 °C 10 KNi500 acc. to DIN 43760 -60 ... +150 °C 10 KNi1000 acc. to DIN 43760 -60 ... +150 °C 10 K- Thermocouples:Type B, PtRh30-PtRh6 0 ... +1820 °C 500 KType C, W5Rh-W26Re (ASTME 988) 0 ... +2320 °C 500 KType D, W3Rh-W25Re (ASTME 988) 0 ... +2495 °C 500 KType E, NiCr-CuNi -200 ... +915 °C 50 KType J, e-CuNi -200 ... +1200 °C 50 KType K, NiCr-Ni -200 ... +1372 °C 50 KType L, e-CuNi -200 ... + 900 °C 50 KType N, NiCrSi-NiSi -270 ... +1300 °C 50 KType R, Pt13Rh-Pt -50 ... +1768 °C 500 KType S, Pt10Rh-Pt -50 ... +1768 °C 500 KType T, Cu-CuNi (acc. to IEC 584) -200 ... + 400 °C 50 KType U, Cu-CuNi (acc. to DIN 43710) -200 ... + 600 °C 50 KMoRe5-MoRe41 0 ... +2000 °C 500 K- Resistance-type sensor: max. meas. range min. meas. spanResistance 10 ... 400 Ohm 10 OhmResistance 10 ... 2000 Ohm 10 Ohm- Voltage sensor: max. meas. range min. meas. spanVoltage -10 ... 100 mV 5 mVResistance thermometer:Sensor connection:2-, 3- or 4-wire connectionMeas. current:< 0,6 mAMax. perm. line resistance: 11 Ohm / lineAccuracy: Pt100, Ni100: ±0.2°C or ±0.08% of meas. spanPt500, Ni500: ±0.4°C or ±0.16% of meas. spanPt1000, Ni1000: ±0.2°C or ±0.08% of meas. spanTemperature effect: Td = ± (15ppm/K * max. meas. range + 50ppm/K * meas. span)Thermocouples :Sensor connection: 2-wire connectionSensor current:< 350 nAAccuracy (typ.): ±0.5K (types: K, J, E, L, U), ±1.0K (types: N, C, D),±2.0K (types: S, B, R, MoRe5-MoRe41)CJC:Pt100 internal or external (0...80°C)CJC accuracy: ±1°CTemperature effect: Td = ± (50ppm/K * max. meas. range + 50ppm/K * meas. span)• universally programmable for- resistance thermometers- thermocouples- resistance sensor- voltage sensor• electrically isolated• output linear to temperature• analog output: 4 … 20 mA, 2-wire technology• high accuracy for the entire ambienttemperature range (-40...85°C)• available with - protectionATEX II 1 G EEx ia llC T4 / T5 / T6• error messages in case of sensor damage orshort-circuit, settings acc. to NAMUR NE43• can be configurated in a few seconds via PC -configuration can be carried out during measuring• - ratingOutput signal: 4…20 mA or 20...4 mA, 2-wire technologyLinearisation: temperature linear, resistance linear orvoltage linearAuxiliary energy: V s 8 … 30 V DC (max.ripple factor: 5Vss for Vs>13V)Electr. isolation (E/O):Û = 3.75 KV ACPerm. load R A : R A R (V s - 8 V ) / 0,022 A [R A in Ohm, V s in V]Supply effects: R ±0.01% / V deviation from 24VLoad effect: R ±0.02% / 100 OhmDigital filter: 0 to 60s, configurableSwitch-on delay: approx. 4sResponse time: 0.5 sOutput limits: 3.8 ... 20.5 mASignal in case of sensor damage: 3.6 mA or >21.0 mA, configurableEMC:Interference immunity and emission acc. toEN 61326-1 and NAMUR NE21Ex-approved: ATEX II 1 G EEx ia IIC T4 / T5 / T6Operating temperature: -40 … +85 °CClimate class: acc. to EN 60654-1, cl. C; condensation permissibleVibration strength: 4g / 2...150Hz acc. to IEC 60 068-2-6Electric connection: via terminals,cross section of connection terminals max.1,75 mm²Housing: PC-housing, suitable for installation inconnection head acc. to DIN 43729 form B.Dimensions: Ø 44 mm x 21 mmIP-rating housing: IP54, connection terminals: IP00Weight:approx. 40 gDimensions: Ø 44 x 21 mm75