Temperature - sensor modulesEBT - 2REBT - 2RE with external sensor for loweror higher temperatures. Sensor: p.r.t. page 89 (GM 87) of catalogue-VO: Option "On-site display"70.0mm60.0mmEASYBUS - sensor modulesfor temperature, humidity and standardized signalsØ9.0mmSpecification:Meas. range: EBT - 2R: 0,0 ... 70,0°CEBT - 2RE: -40,0 ... 120,0°CResolution: 0,1°CAccuracy: EBT - 2R: ±0,5°CEBT - 2RE: ±0,8°CHousing: stream-lined housing for indoorinstallation (can be directly mounted on flushtypesocketsDimensions: 70 x 70 x 26 mm (H x W x D)Sensor (EBT-2RE): GM 87 (V4A-can,5mm Ø, 50mm long, approx. 1m 2-pole silicon cable)26.0mm70.0mmEBT - AP (design type 1)EBT - AP (design type 2)EBT - AP (design types 3 and 4)EBT - AP (design type 5)Temperature sensor module integrated in water-proof surface-type housing(IP65). Various sensors (KTY 87-205, Pt1000) available.-VO: Option "On-site display" (LCD with 10 mm high digits)Standard:G = ½"L= 100mmD = 6mmStandard:L= 100mmD = 5mmDesign 1 Design 2 Design 3Design 4Design 5Standard:G = ½"HL = 50mmL= 100mmD = 6mmStandard:L= 50mmD = 3mmDesign types:Design 1: With threaded pin „G“ for direct screwconnectionDesign 2: or higher temperatures, threaded pin „G“at a distance from housing. HL = collar tube length.Design 3: Indoor or outdoor probe for direct wallmounting (encapsulation of electronics required foroutdoor use).Design 4: Duct-type probe with probe tube arrangedcentrally and pointing downwardsDesign 5: Transducer for existing Pt1000 sensors orfor applications where probe and housing need to beseparated (e.g. extremely high ambient temperatureor due to design reasons)Ordering information: at least necessary:Type, sensor element, range, output signal and typespecific sensor tube data: "L" and "D" (type 1-4),"G" (type 1, 2), "HL" (type 2).Ordering examples: all data to be mentioned in any case!EBT-AP, desgin 1, Pt1000 DIN cl. B, G = 1/2", L = 100mm, D = 6 mmEBT-AP, design 3, KTY87, L = 50 mm, D = 3 mmEBT-AP, design 5, Pt1000Options: Upcharge-LACK: Encapsulation of PC board (for outdoor use)Extended probe (L) or collar tube (HL):Price incl. up to 100mm, extended length: price per 100mmOther design types upon request - please do not hesitate to contact us!Design 1water-proof IP 65Specification:Sensor element:- Semiconductor sensor, e.g. KTY 87-205- Resistance thermometer Pt1000 acc. toDIN IEC 751Measuring ranges:- KTY 87-205 : -40,0 ... +120,0°C- Pt1000: -50 ... +400°CResolution: KTY 87-205: 0,1°CPt1000: 1°CAccuracy:- KTY 87-205: ±0.8°C (sensor and electronics)- Pt1000: ±0,2%S (electronics)Sensor accuracy: (Pt1000)Standard: acc. to DIN class B (±0,3°C at 0°C)Option : 1/3 DIN: ±0,1°C at 0°C(upcharge p.r.t. page 12)Electric connection:elbow-type plug acc. toDIN 43650 (IP65), output 2-wire connection,max. 1,5mm 2 each, no polarityBusload: 2 EASYBUS-devicesSensor connection:2-wire connection available (e.g. design 5)Sensor mounting: sensors are electricallyinsulated as a standard.Ambient temperature (electronics): 0...70°CTemperature coefficient: 0,05%/°CStorage temperature: -20...+85°CHousing: ABS (IP65)Mounting position: anyixing: by means of screw-thread or fixingholes in the housing (accessible after topcover has been removed)Mounting distance: 50 x 70mmixing screws: max.shaft Ø: 4mmThread sizes"G": 1/2" (standard) material V2A,options: V4A; G1/4", G3/8", G1/2", M5, M6, M8,M10, M12, other threads upon request!Sensor pipe: „D“: 3 mm, 4mm (not forKTY87-205), 5 mm, 6 mm and 8 mm -material V4A (1.4571)Collar tube: HL = please specify lengthdesired (for design 2 only) (V4A-tube)60
70.0mm26.0mm60.0mmØ9.0mm70.0mmEASYBUS - sensor modulesfor temperature, humidity and standardized signalsHumidity - sensor modulesEBH - 2R-VO: Option "On-site display"-HO: Option "High-humidity sensor (0...100%)"Specification:Meas. range: 0,0 to 100,0% r.h.Resolution: 0,1% r.h.Accuracy: max. ± 3% r.h.(linearity and hysteresis rang. from 30 to. 80% r.h.)Sensor: capacitive, condens., washable etc.Electric connection: 2 pin screw-typeterminal, no polarity, max. 1,5mm 2Busload: 2 EASYBUS-devicesAmbient temperature: 0...70°CHousing: 70 x 70 x 26 (H x W x D), materialABS plastic, can be mounted on flush-type socketEBH - 1R-HO: Option "High-humidity sensor (0...100%)"-LACK: Option "Encapsulated PC-board"-VO: Option "On-site display"-SHUT: Option "Heat-absorption hat"4,2mm Øor outdoor use:Option "encapsulated PC board" required.We also recommend using a heatabsorption hat to avoid falsification ofmeas. data due to sun/rain etc..(p.r.t. page 42)Specification:Meas. range: 0,0 to 100,0% r.h.Resolution: 0,1% r.h.Accuracy: max. ± 3% r.h.(linearity and hysteresis rang. from 30 to. 80% r.h.)Sensor: capacitive, condens., washable etc.Housing: 80 x 82 x 55 (H x W x D), material:ABS plastic, IP rating: IP65, sensor tube:anodized aluminum, Ø 14 mm, bronze filter(80-160µm) screw connectionAmbient temperature: 0...70°CElectric connection: quick-release fixture(plug-in and IP65) with elbow-type plug,DIN43650, max. 1,5mm 2EBH - 1KEBH - 2K-L300, L400, L500: Option "Longer probe tube"-HO: Option High temperature (-30...+140°C)"for other options p.r.t. EBH - 1RSpecification:identical to EBH - 1R, but sensor can besubjected to higher temperatures due tolonger probe tube (-30...+140°C) - optionElectronics and housing : max. 0...70°CProbe tube length: cpl. with screw-typebronze filter approx. 220mm (standard)Extended length 300, 400 or 500mmavailable against upcharge.(please specify upon order!)EBH - 2Kidentical to EBH - 1K,but with central sensortube arrangement andpointing downwards(e.g. for direct mountingonto plain channelsurfaces)EBH - 2KOther types upon request !Bronze-filter61