Catalog 08-2001 without prices - nl3prc

Water level / well probeTank contents meas. probePressure measuring transducerType: GBS 01Application: permanent fill level measuring and remote transmission ofcontents respectively liquid level of oil tanks, water or liquid tanks, deepwells, rivers, lakes, water collection sumps in garbage pits etc.Description: piezoresistive pressure sensor with temperaturecompensation. Welded, non-corrosive design with integral andadditionally sealed water-proof connecting cable.Pressure compensation achieved via tube within the cable. Pleasespecify cable length (up to max. of 500 m) when ordering.Specification:Meas. ranges: 0.1 bar (100mbar) to 25 bar = 1 to 250m water columnAvailable ranges: 0.1, 0.25, 0.4, 0.5, 0.6, 1.0, 1.6, 2.5, 4.0, 6.0, 10.0,16.0 and 25.0 barOverload and bursting pressure:Meas. range (bar): 0.1, 0.25, 0.4, 0.6 1 to 600 bar 1000Overload (bar): 1.2 2 x meas. range 1500Output signal: 4-20mA (others upon request - upcharge)Permissible impedance: R A [Ð] = Vs [V] - 10V / 0.02 AAuxiliary energy: 10...30VDC (others upon request)Accuracy: linearity: typ ±0.2 % S (max. ±0.5 %)stability: typ ±0.1 % S (max. ±0.2 %)Operating temperature: 0 ... +50 °C 1)Temperature coefficient: ~0.02 % S / KHousing: chromium-nickel alloy 1.4301 or 1.4571. Male thread G 1/2"accessible after removal of plastic protection cap.Probe dimensions: Ø 27 mm, length of metal body: approx. 115 mm,cable Ø approx. 7.5 mmElectric connection: fixed integral cable (PU=polyurethane), standardlength 10 m (suitable for fuel oil).Extra long cable against upcharge (please specify when ordering)Glass-fibre screen protects cable against tearing.Special design-types (upcharge):Upcharge for extra long cableupcharge per m1) applications with higher temperature upcharge:of media (+85°C) with 10m teflon cableNon-standard output signal: e.g. 0-10V upcharge:Integrated lightning protection:upon requestEx-protection upon request!Type: GAH 40General application: measuring of over/underpressure for pneumatics,hydraulics, cooling and hydro technology, compressors etc.Specification:Measuring principle: thick-film stainless steel sensorMeas. ranges: -1 to 1.5 bar 0 to 2.5 bar-1 to 3 bar 0 to 4 bar-1 to 5 bar 0 to 6 bar-1 to 9 bar 0 to10 bar-1 to 15 bar 0 to 16 bar0 to 25 baror higher or additional values please refer to GPE81 (page 83)Overload limit: twice the measuring value acc. to VDI/VDE 2184Output signal: 4-20mA, 2-wirePermissible impedance: R A [Ð] = Vs [V] - 11.5V / 0.02 AAuxiliary energy: 11.5...30VDCAccuracy: linearity: R1% of output range conforming to DIN JEC 770.Zero signal error ±0.6% of output range.Hysteresis and repeatability: R0.5%Permissible medium/ambient temperature: -40 to +85° CInfluence of ambient temperature: for range -20 to +70° C R0.05%/KElectromagnetic compatibility:Electrostatic discharge: IEC 801-2/severity 4 (testing voltage 15 kV)Transient interference (burst): IEC 801-4/severity 4 (testing voltageapplied to input/output 2kV)Electromagnetic fields: IEC 801-3/severity 3 (intensity on test floor 10 V/m)Setting time: R30 msMechanic oscillation: max. 10 g at 15 to 2000 HzMechanic shock: 500 g/1 msMounting position: any positionIP rating: IP 65 conforming to DIN 40 050Material of housing:Parts coming into contact with pressure media: standardstainless steel 1.4562 and 1.4571Housing: stainless steel 1.4301, polycarbonatePressure connection: G¼" A acc. to DIN 16288 (standard) - others uponrequestElectric connection: elbow-type plug acc. to DIN 43650, design-type AWeight: approx. 110gSpecial design-types (upcharge):Pressure connection: conn. 7/16 UNupcharge:GWA1214 V4A (1.4571) thread adapter G½"with internal thread G¼" to screw onto measuring transducer82