2 - Big Ass Fans

8’–24’ POWERFOIL ® X2.0 & 10’–24’ POWERFOIL ® X2.0PLUS FANSHanging the Fan (cont.)213. Attach lower yoke (to extension tube)Attach the lower yoke to the bottom of the extension tube with theLower Yoke Hardware as shown.Tighten the hardware so that it is snug, but not fully tightened.baLower Yoke Hardware (BAF-Supplied):a. (2) 1/2-13 x 4-1/2’’ GR 8 Boltb. (4) 1/2’’ Flat Washerc. (2) 1/2-13 Nylock Nutcb4. Attach main fan unit (to lower yoke)CAUTION: Do not remove main fan unit from its protectivepackaging prior to hanging it!CAUTION: To prevent damage, avoid contact with the bottomof the main fan unit and hub!CAUTION: The main fan unit is heavy. Use caution whenraising it.ATTENTION : Ne pas sortir l’unité principale du ventilateur deson emballage de protection avant de la suspendre.ATTENTION : Pour éviter tout dommage, éviter le contact avecla partie inférieure de l’unité principale du ventilateur et dumoyeu.ATTENTION : L’unité principale du ventilateur est lourde. Lasoulever avec précaution.abbcAttach the main fan unit to the lower yoke with the Main Fan UnitHardware as shown. Do not rest the main fan unit on the ground! Makesure the lower cable is positioned between the lower yoke brackets asshown on the right.Tighten the bolts to 40 ft·lb (54.2 N·m) using a torque wrench and 3/4”socket. Do not discard the main fan unit packaging. It should be used ifthe fan is ever moved or relocated.Main Fan Unit Hardware (BAF-Supplied):a. (4) 1/2-13 x 1 3/4” GR 8 Boltb. (8) 1/2’’ Flat Washerc. (4) 1/2-13 Nylock NutAfter securing the main fan unit to the lower yoke, allow the fan to hang sothat the extension tube is plumb to the ground. When it is properly positioned,fully tighten the mounting hardware (Lower Yoke Hardware and ExtensionTube Hardware) to 40 ft·lb (54.2 N·m).WWW.BIGASSFANS.COM ©2012 DELTA T CORP. DBA BIG ASS FAN CO. ALL RIGHTS RESERVED