SIMATIC ET 200 - For distributed automation solutions - November ...

© Siemens AG 2010SIMATIC ET 200LDigital block I/OTerminal blockThe terminal block accommodates the electronic block. Itcarries the wiring, so that no cables need to be unpluggedwhen the electronic block is replaced. The terminal blockshave a 2-wire connection system as standard. As an option,additional terminals can be clipped on to enable 3-wire or4-wire connection to be used.The terminal block can be mounted in any position on a standardrail. Terminal blocks are available for 16 and 32 channelswith screw-type or spring-loaded terminals.ET 200L block I/OThe compact SIMATIC ET 200L I/O device with IP20 degreeof protection comprises one terminal block and one electronicblock. Connection to PROFIBUS DP (with a transmissionrate of 1.5 Mbit/s) is through the interfaceintegrated in the electronic block.Terminal blockOrder No. group16 channels, screw-type terminals 6ES7 193-1CH0. 1)16 channels, spring-loaded terminals 6ES7 193-1CH1.32 channels, screw-type terminals 6ES7 193-1CL0.32 channels, spring-loaded terminals 6ES7 193-1CL1.Electronic blockThe electronic blocks contain the digital input and outputchannels for 24 V DC. The station address is set using rotarycoding switches on the electronic block.Electronic blockOrder No. group16 DI 6ES7 131-1BH. 1)32 DI 6ES7 131-1BL.16 DO; 0.5 A 6ES7 132-1BH.32 DO; 0.5 A 6ES7 132-1BL.16 DI and 16 DO; 0.5 A 6ES7 133-1BL.1) Also available as SIPLUS component for expanded temperature range-25 °C … +60 °C and corrosive atmosphere/condensation(exact details at www.siemens.com/siplus).38SIMATIC ET 200L