SIMATIC ET 200 - For distributed automation solutions - November ...

© Siemens AG 2010Interface modules for PROFIBUSThe interface modules (IMs) for PROFIBUS can be combinedwith three different modules for connecting the bus and powersupply.All connection modules for PROFIBUS have visible addresssetters that allow the addresses to be easily read as well as aselectable terminating resistor. The integrated T functionalitysupports the start-up of partial segments and uninterruptedbus communication in the event of a servicing requirement.• Direct connection with cable gland: For up to 16 A electronicload and a cross-section of up to 2.5 mm².• ECOFAST (Energy and Communication Field InstallationSystem) – The standardized Siemens connection techniquefor cabinet-free distribution is based on hybrid cables forbus signals and power supply.• M12, 7/8'': The familiar connection method with widely implementedconnector standard.PROFIBUS IM withM12, 7/8" connectionInterface modulesProtocolTransfer rate, max.Firmware updateDimensions (with connectionmodule)IM 154-1 DPIM 154-2 DP HFPROFIBUS DP12 Mbit/svia PROFIBUS90 x 130 x 173 mmWith CM IP DP M12, 7/8"90 x 130 x 120 mmWith CM IP DP directly90 x 130 x 80 mmWith CM IP DP ECOFASTOrder No. group 6ES7 154-1.6ES7 154-2.PROFIBUS IMwith direct connectionPROFIBUS IMwith ECOFAST connection46SIMATIC ET 200pro