Lighting - Trackspot Manual - SXS Events

Appendix DImportant courtesy Safety ofInformationnd Audio-Visual Phone: 0870 Services 080 2342mail: enquiries@sxsevents.co.ukwww.sxsevents.co.ukEnglish VersionWARNING: For Continued Protection Against Fire1. This equipment is designed for use with Philips type QT 8500, 250watt lamp only. Use of any other type lamp may be hazardous andmay void the warranty.2. Do not mount on a flammable surface.3. Maintain minimum distance of 1.0 meter (3.28 feet) fromcombustible materials.4. Replace fuses only with the specified type and rating.5. Observe minimum distance to lighted objects of 1.0 meter (3.28feet).WARNING: For Continued Protection Against Electric Shock1. If this equipment was received without a line cord plug, attach theappropriate line cord plug according to the following code:• brown–live• blue–neutral• green/yellow–earth2. As the colors of the cores in the mains lead of this equipment maynot correspond with the colored markings identifying the terminalsin your plug, proceed as follows:• the core which is colored green and yellow must be connectedto the terminal in the plug which is marked withthe letter “E” or by the earth symbol , or colored greenor green and yellow.• the core which is colored blue must be connected to theterminal which is marked with the letter N or coloredblack.• the core which is colored brown must be connected to theterminal which is marked with the letter L or colored red.3. This equipment must be earthed.4. Disconnect power before re-lamping or servicing.5. Equipment suitable for dry locations only. Do not expose thisequipment to rain or moisture.6. Refer servicing to qualified personnel; no user serviceable partsinside.7. Class I equipment - this fixture employs a grounded typereceptacle and is not intended for connection to a two wire,ungrounded source of supply.www.sxsevents.co.ukDTrackspot User Manual Important Safety Information D-1