EO18-12003 - toshiba tec europe
EO18-12003 - toshiba tec europe
EO18-12003 - toshiba tec europe
- No tags were found...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
3. MAIN UNIT REPLACEMENT <strong>EO18</strong>-<strong>12003</strong>(Revision Date: Jun. 21, 2002)3.2 BOTTOM COVER SECTIONC modelWARNING!Care must be taken not to short-circuit the lithium battery on the ST-PGA ENGINE PC Board.1) Remove the two DSM-3x6 screws to remove the CPU VENT. (Refer to Fig. 3-37)2) Remove the four DSM-3x6* screws to remove the 2.5" HDD Holder. (Refer to Fig.3-42)DSM-3x6** screwDSM-3x6* screwDSM-3x6* screwDSM-3x6** screwFig. 3-423) Disconnect the VR Cable, PS Connector, and Fan Cable from CN7, CN8, and CN6 on the ST-PGA ENGINEPC Board, respectively. When the UPS Battery is connected, remove the UPS Battery Connector. (Refer toFig.3-43).PS Connector (CN8)UPS Battery ConnectorFan Cable (CN6)VR Cable (CN7)Fig. 3-433-17