EO18-12003 - toshiba tec europe

5. ST-60 BIOS SETUP (A, B models) EO18-12003(Revision Date: Jun. 21, 2002)5.1 GENERAL5. ST-60 BIOS SETUP (A, B models)5.1 GENERALThis section describes setup programming procedure for the BIOS ROM used in the ST-60.To enter the Setup Screen, press the [F2] key when the BIOS is started up (after completing the memory check).5.1.1 CONFIGURATIONEnters by the [F2] key operation.Phoenix SETUP(Main Setup)Setup for the Time and type of FDD, HDD, CRTCIDE Adapter 0 MasterIDE Adapter 0 SlaveIDE Adapter 1 MasterIDE Adapter 1 SlaveMemory CacheMemory ShadowBoot OptionsKeyboard FeaturesAdvanced (Advanced Setup)Setup of HDD1Setup of HDD2Setup of HDD3Setup of HDD4Setup of Cache MemorySetup of Shadow RAMSetup concerning Start Up (Num Lock, etc.)Setup concerning KeyboardPerforms Detail SetupSetup of Plug & Play/Large DISKIntegrated PeripheralsPCI DevicesAdvanced Chipset ControlDetail Setup of HDCDetail Setup of PCI Bus SlotDetail Setup of CPU Peripheral Chip SetSecurity (Security Setup)Power Savings (Setup of Power Management)Exit (Save/Exit Setup)Setup of Power Management and UPS/RelayDefault Value Loading/Setup Cancel/Save/Exit5-1