command link multifunction meter (square) - Yamaha Outboards

More documents

Recommendations

Info

FUEL SENSOR (setting fuel sensor) FUEL SENSOR (setting fuel sensor) You can set the fuel sensor type that is connected to this meter. 1. Turn the engine off and the engine start switch to ON. 2. (4 seconds): To activate the custom mode. 3. (2 times): Press to switch between the setting function names. 4. : To switch to the change settings display. 5. : Press to switch between the fuel sensor types. ABYC (US) EUROPE YAMAHA Blinks 6. (1 second): To change the fuel sensor type and return to the custom mode selection display. 7. (1 second): To return to the normal display. 33
3. Fuel management meter unit NOTE: Depending on the model of the outboard motor, some functions may not be compatible. For information on models which contain the compatible functions, consult a Yamaha dealer. Fuel flow meter The fuel flow meter shows the fuel consumption of each engine per hour or the total fuel consumption of all engines. (Page 36) Multifunction display (Page 37) · Up to three displays can be switched to show the information. · Shows up to two types of information combined on one display. Total fuel consumption display (Page 38) Fuel economy display (Page 39) Remaining fuel display (Page 40) · The information shown on each display and the display format combination can be changed (custom mode). DISPLAY (setting displays) (Page 42) 34 Fuel management meter unit
Page 1 and 2: COMMAND LINK MULTIFUNCTION METER (S
Page 3 and 4: The Command Link Multifunction Mete
Page 5 and 6: Changing settings (custom mode) ...
Page 7 and 8: Description 1 SET button 2 MODE but
Page 9 and 10: Multifunction display The multifunc
Page 11 and 12: Oil level display (2-stroke models)
Page 13 and 14: Battery voltage display The battery
Page 15 and 16: Changing backlight settings/Adjusti
Page 17 and 18: MAINTENANCE (resetting maintenance
Page 19 and 20: 2. (4 seconds): To activate the cus
Page 21 and 22: One display: Display configuration
Page 23 and 24: Blink * In the display example, the
Page 25 and 26: Service functions Diagnosis You can
Page 27 and 28: 2. Speedometer unit NOTE: Depending
Page 29 and 30: Speedometer The speedometer shows t
Page 31 and 32: NOTE: Since “Display 1” is the
Page 33 and 34: System voltage display BATTERY or B
Page 35 and 36: NOTE: If no operations are carried
Page 37: UNIT (setting displayed units) You
Page 41 and 42: Fuel flow meter The fuel flow meter
Page 43 and 44: NOTE: Since “Display 1” is the
Page 45 and 46: Remaining fuel display/Changing bac
Page 47 and 48: DISPLAY (setting displays) You can
Page 49 and 50: TTL You can select to show gallons
Page 51 and 52: 7. (1 second): To return to the nor
Page 53 and 54: Description 1 SET button 2 MODE but
Page 55 and 56: Fuel meter The fuel meter shows the
Page 57 and 58: Fuel economy display ECON shows the
Page 59 and 60: Depth display (optional: Triducer-m
Page 61 and 62: Changing settings (custom mode) Swi
Page 63 and 64: Changing the display configurations
Page 65 and 66: 6. : Press to switch between the di
Page 67 and 68: 7. (1 second): To return to the nor
Page 69: Setting the initial settings Before

command link multifunction meter (square) - Yamaha Outboards

Create successful ePaper yourself

Delete template?

Save as template?