command link multifunction meter (square) - Yamaha Outboards
command link multifunction meter (square) - Yamaha Outboards
command link multifunction meter (square) - Yamaha Outboards
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Multifunction display<br />
The <strong>multifunction</strong> display shows up to three<br />
types of information simultaneously using<br />
numeric values or graphics. In addition, up<br />
to four displays can be set up for the display<br />
configuration with a combination of information.<br />
The configuration of the default displays<br />
is described below.<br />
: Press to switch between the displays.<br />
Display 1<br />
(4-stroke)<br />
Oil pressure +<br />
Total hour<br />
Display 2<br />
Display 3<br />
Display 4<br />
Display 1<br />
(2-stroke)<br />
Oil level +<br />
Total hour<br />
Total hour, Trip hour<br />
Cooling water/ Cooling water/<br />
engine temperature + engine temperature +<br />
Battery voltage level + Battery voltage level +<br />
Oil pressure Oil level<br />
Battery voltage value,<br />
Battery voltage level<br />
4<br />
Multifunction display<br />
When the engine start switch is turned to<br />
OFF, the last display shown is shown first<br />
when the engine start switch is turned to ON<br />
again.<br />
NOTE:<br />
To change the display configuration, see<br />
“DISPLAY (setting displays)” in “Changing<br />
settings (custom mode).”<br />
Tacho<strong>meter</strong> unit